Home Companies Jiaxing Haina Fastener Co.,Limited

High Tensile Full Threaded Rod Galvanized Roofing Bolts With Nut and Washer

Contact Us

[China]

Trade Verify

Address: B1306 Landmark Plaza No.1238 Hongxing Road JiaXing , ZheJiang , China 314001

Contact name:TonyFang

Jiaxing Haina Fastener Co.,Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

High Tensile Full Threaded Rod Galvanized Roofing Bolts With Nut and Washer

Country/Region china
City & Province jiaxing zhejiang
Categories Supplies and Equipment

Product Details

High Tensile Full Threaded Rod Galvanized Roofing Bolts With Nut and Washer

 

1.Product Description

Roofing Bolts components in the concrete foundation installation, the bolt was J-shaped, L-shaped end buried in concrete use.
The tensile strength of the anchor bolt is the tensile strength of the round steel itself, the size is equal to the cross-sectional area multiplied by the allowable stress value (Q235B: 140MPa, 16Mn or Q345: 170MPA) is the design of the allowable tensile capacity.
Anchor bolts generally use Q235 steel, that is round. Screw steel (Q345) strength, so the nut does not have a round wire easily round. For an optical round stud, the depth is typically 25 times its diameter, and then a 90 degree hook about 120mm long. If the bolt diameter is too large (such as 45mm) depth is too deep, you can solder the side plate in the bolt, that is to do a big head on it (but there is a certain requirement). Burial depth and the hook is to ensure that the friction between the bolt and the foundation, and will not pull out of the bolt damage occurred.
Load testing with Eye bolt by 2.5 times the working load are 20,000 times fatigue test at 1.5 times the working load. Screw rings to meet or exceed ASME B30.26 standards. Screw rings made of high alloy steel by reference to Germany RUD WBG type production, the products are exported to Europe and America, and by local-level G80 standard test. Better material than the existing domestic screw rings Rally higher offers tensile testing reports. Screw rings shall professionals operation, see the instructions for use and, when connected to the spreader should be kept with the spreader rings rotatable joints, professionals should conduct regular safety inspection. Maximum working load of up to 30T, and can be customized inch thread.

 

 

 

2. Specification

 

DiameterOutter Dia.ThicknessHead Thickness 
1/4"0.25-0.28mm0.19mm1.19

 

More details:

 

Product Dimensions1/4"
Item Length2.06 inch
StandardASME/ANSI B 18.15-1995
Free SampleAvailable, for free
Advantages

High Tensile, Offer High Holding Power, Corrosion Resistance

 

3.Application

 

Eye bolt widely used in ports, power, steel, shipbuilding, petrochemical, mining, railways, construction, metallurgy, automobile manufacturing, plastics machinery, industrial control, highways, large transport, pipelines and auxiliary set, slope tunnels, wells control protection, salvage, ocean engineering, airport construction, bridges, aviation, aerospace, and other important venues and infrastructure construction industry, machinery and equipment.

 

4.Advantages

 

1. eye bolts should be 20 or 25 steel (GB699) Manufacturing.

2. The eye bolts must be approved by the whole forging. Forgings should be normalized, and remove oxide. Grain size of the finished product should not be lower than level 5 (GB6394), forgings should not have been burnt, crack defects.

 

5.More pictures

 

 

 

 

 

 

 

 

 

 

 

 

 

Hot Products

M24 Carbon Steel Hot Dip Galvanized Hex Head Grade 8.8 Drop Forged Eye Bolt Description: Thanks for ...
Stainless Steel 304 316 DIN 580 Lifting Eye Bolt , Fully Threaded Eye Bolt, eye screw Description: ...
1000mm Length M10 DIN 975 DIN976 Stainless Steel Fully Threaded Rod 1. Product Description Threaded ...
Metric Thread Concrete Fixing Zinc Plated Eye Bolt With Sleeve Anchor 1. Product Description ...
High Tensile Full Threaded Rod Galvanized Roofing Bolts With Nut and Washer 1.Product Description ...
carbon steel Grade 8.8 / 10.9 / 12.9 Zinc Plated Metric Fully Threaded Rod Description: Threaded rod ...