Jiaxing Haina Fastener Co.,Limited |
Verified Suppliers
|
|
DIN976 carbon steel Stud Full cutting all Threaded Rod bolt and nut
1. Description:
Stud bolt, also known as the screw.
DuPont PTFE (PTFE) Trademark mainly used on the following products:
PTFE, FEP, PFA, ETFE, AF, NXT, FFR.
PTFE: PTFE (polytetrafluoroethylene) nonstick coatings can be used
continuously at 260 ℃, the highest temperature 290-300 ℃, low
coefficient of friction, good abrasion resistance and excellent
chemical stability.
FEP: FEP (fluorinated ethylene propylene copolymer) nonstick
coatings melt flow during baking to form non-porous film with
excellent chemical stability, excellent non-stick properties, the
maximum temperature of 200 ℃.
PFA: PFA (perfluoroalkyl compounds) non-stick coatings and FEP melt
flow during baking to form non-porous film. PFA has the advantage
of higher continuous use temperature of 260 ℃, more just toughness,
particularly suitable for use in chemical resistance and
anti-sticking field of use under high temperature conditions. Han Ming and Qing era furniture components name. GB Base standard
corresponding to DIN975. Due to different locations and names are
different. Generally refers to the setting member is connected
between the legs of the lower surface of the frame. There corset
waist furniture in the following parts of the main coupling member.
Located in other parts of the general renamed teeth. In addition,
also used in the construction, most decoration.ASTM A193 B7 B7M
A320 L7 L7M Stud Bolt threaded rod are commonly used in offshore
flatform, oil and gas. With PTFE coating, it is in high
anti-corrosion.
The specification for ASTM A193 covers alloy and stainless steel bolting for pressure vessels, valves, flanges, and fittings for high temperature or high pressure service, low temperature, or other special purpose applications. The ASTM A193 specification covers bars, bolts, screws, studs, stud bolts, and wire. The material may be further processed by centerless grinding or by cold drawing. Below are some of the ASTM A193 grades used commonly.
Common ASTM A193 specifications:
ASTM A193 B7 Alloy steel, AISI 4140 or 4142, quenched and tempered
ASTM A193 B6 Stainless steel, AISI 410, heat treated
ASTM A193 B8 Class 1 Stainless steel, AISI 304, carbide solution treated.
ASTM A193 B8M Class 1 Stainless steel, AISI 316, carbide solution treated.
ASTM A193 B8 Class 2 Stainless steel, AISI 304, carbide solution treated, strain hardened
2. Specification:
Name: (Maichuan) | DIN976 carbon steel Stud Full cutting all Threaded Rod bolt and nut |
Equal Standard | DIN975 |
Standard No | ASTM A193 ASTM A320 |
Thread Type | UNC, UNF, UNEF, M, BSW, BSF, TR, ACME, NPT TP |
Material | Alloy Steel(40Cr/35CrMo/4140) |
Dimension | Metric size from 6mm-100mm, Inch size from 1/8"-3-1/2". |
Surface treatment | PTFE, PTFE, Xylan Blue, treatment: Plain, black finished, Zinc plated (Galv), Hot DIP Galvanized, Nickel, phosphate black, DACRO coating, etc. |
Production Technique | Cold forging, Hot forming, Machining, Heat treatment, Staming, etc |
Grade | ASTM A193 B7 B7M A320 L7 L7M |
Tolerance | 6g |
3. Application:
Oil and Gas.
4. Advantages:
1, Not sticky: Almost all the material is not bonded with PTFE
coating. Thin film also showed good adhesion properties.
2, Heat resistance: PTFE coating has excellent heat resistance and
low temperature properties. Short period of time can be high
temperature to 300 ℃, generally between 240 ℃ ~ 260 ℃ can be used
continuously, with significant thermal stability, it can work
without embrittlement in freezing temperatures, it does not melt at
high temperatures.
3, Sliding: PTFE coating has a low coefficient of friction. Load
sliding friction coefficient changes, but only in the values
between 0.05-0.15.
4, anti-wet: PTFE coating surface water and oil production
operations are not easy to dip solution, such as sticking a small
amount of dirt, simply wipe clean. Downtime is short, save time and
improve efficiency.
5, Wear resistance: under high load, with excellent wear
resistance. In a certain load, wear-resistant and non-adherence
with the dual advantages.
6, Corrosion resistance: PTFE is almost free from erosion of the
drug, in addition to withstand molten alkali metal fluoride, a
strong acid medium, and above all than 300 ℃ sodium hydroxide
(including aqua regia), strong oxidizing agents, reducing agent and
various organic solvents, can protect parts from being any kind of
chemical corrosion.