Wall Concrete Passivation Finish Stainless Steel/carbo steel Wedge Anchor

Wall Concrete Passivation Finish Stainless Steel/carbo steel Wedge Anchor

1. Product Description

Installation

Drill hole in base material to your specified embedment depth. Debris from drilling must not interfere with the required embedment depth, the hole that you drill needs to be cleaned out with compressed air. Alternatively if the concrete thickness allows you can drill hole deep enough to accommodate the required embedment depth and the dust/debris from drilling. Assemble anchor so the nut is flush with the top of the anchor, place anchor into position through fixture and drive into the hole until the nut and washer are tight against the fixture.

2. Specification

3.Application

Wedge anchor extends into the tube sheet bore tube ends rolling leaving the tube wall expansion, plastic deformation, the diameter increases, the tube head completely fit the wall of the hole in the tube plate, tube sheet and forcing the elastic deformation . When the expander is removed, the elastic deformation of the tube plate desire restitution, and plastic deformation of the pipe end can not be recovered, the result is the tube plate and hugged the tube end, so as to achieve both the seal does not leak and are firmly connected purposes .
Suitable for concrete and dense natural stone, metal constructions, metal profiles, base plate, a support plate, brackets, railings, windows, walls, machines, girders, beams, brackets, and so on.

4. Advantages