Gr 4.8 M6 - M24 Full Thread Hook Blue White Zinc Plated Machinery Eye Bolt

Gr 4.8 M6 - M24 Full Thread Hook Blue White Zinc Plated Machinery Eye Bolt 
 

Description:

Eye bolts, also known as eye screw, Eye bolts , and by normalizing treatment and removal of scale; forgings no over-burning, crack defects; screw rings unity through hardness test, hardness value HRB67 ~ 95. Crown screw rings force strength rating 12.9.

Screw rings must be mounted vertically with the upper plane of the workpiece, and the joints should be smooth, engaging require close. You must adjust to the stretching direction of the screws to avoid contact with sharp edges of objects.

Load testing with screw rings by 2.5 times the working load are 20,000 times fatigue test at 1.5 times the working load. Screw rings to meet or exceed ASME B30.26 standards. Screw rings made of high alloy steel by reference to Germany RUD WBG type production, the products are exported to Europe and America, and by local-level G80 standard test. Better material than the existing domestic screw rings Rally higher offers tensile testing reports. Screw rings shall professionals operation, see the instructions for use and, when connected to the spreader should be kept with the spreader rings rotatable joints, professionals should conduct regular safety inspection. Maximum working load of up to 30T, and can be customized inch thread.

, are widely used in jewelry, hanging accessories, but also one of the common hardware accessories architectural decoration. An eye bolt is a bolt with a loop at one end. They are used to firmly attach a securing eye to a structure, so that ropes or cables may then be tied to it.

Refinement eyebolt can improve the integrated quality of your product.Screw rings forging a whole, and by normalizing treatment and removal of scale; forgings no over-burning, crack defects; screw rings unity through hardness test, hardness value HRB67 ~ 95. Crown screw rings force strength rating 12.9.
Screw rings must be mounted vertically with the upper plane of the workpiece, and the joints should be smooth, engaging require close. You must adjust to the stretching direction of the screws to avoid contact with sharp edges of objects.

Specification: