Home Companies Jiaxing Haina Fastener Co.,Limited

Zinc Plated Flat Metal Washers M2 - M100 , Spring Loaded Washer Carbon Steel

Jiaxing Haina Fastener Co.,Limited

Contact Us

[China] country

Trade Verify

Address: B1306 Landmark Plaza No.1238 Hongxing Road JiaXing , ZheJiang , China 314001

Contact name:TonyFang

Inquir Now

Jiaxing Haina Fastener Co.,Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Zinc Plated Flat Metal Washers M2 - M100 , Spring Loaded Washer Carbon Steel

Country/Region china
City & Province jiaxing zhejiang
Categories Washers
InquireNow

Product Details

DIN127 DIN128 Carbon Steel Zinc Plated M2-M100 Spring Washer Flat Washer

 


Description:

 

Spring washer are mainly punched out from iron plates. Spring washer: after lock, use elastic pad have the effect of locking, and of course to a double nut effect is poor.
Single nut + flat mat, play mat: rely on the nut itself locking force and elastic cushion locking performance, a double nut.
Flat washer: only increase the surface area Prevent the soft substrate was installed a damaged, or is blocking hole.
Locking method still has a lot of, this is just a very old some basic locking method, but also very practical.
Trampoline's role is to prevent the screw loose caused by the vibration of the machine or heat bilges cold shrink.Role is flat mat, increase the contact area of the screw and machine 1, 2, eliminate the trampoline at the time of discharge screw damage on the surface of the machine must be a spring when using a flat mat, flat pad close to the surface of the machine, spring cushion between the plain washers and nuts.
Flat mat role is long screw  is screw is half buckles added flat washer cap can take full 2 is the place on the screw hole is too large added a flat washer not leak down
Trampoline is mainly used for locking, used in vibration is not big, if the vibration is big, generally want to use the double nut locking or other locking method, flat washer is mainly used to increase the contact area, like on the bearing seat because the drive is long and narrow hole, must be the home of the flat washer.
Flat mat increase the contact area, spring cushion is used for locking, when it is used in trampoline should pay attention to the direction of the opening, or the locking effect is not big.

DIN127 DIN128 Carbon Steel Zinc Plated M2-M100 Spring Washer Flat Washer

 

Flat and spring washer is generally used to distribute the load of a threaded fastener, such as a bolt, scres or nut. Other uses are as a spacer, spring (wave washer), wear pad, preload indicating device, locking device, and to reduce vibration , rubber washer. Washers usually have an outer diameter (OD) about twice larger than their inner diameter (ID).

We are very competive on this wasger, If you have more questions,Please contact us by email: me@hainafastener.com ,

 

Specification: 

 

Available StandardDIN127 DIN128 Carbon Steel Zinc Plated M2-M100 Spring Washer Flat Washer
SpecificationStandard or customization
MaterialCarbon Steel or stainless steel as appointed.
Available MaterialCarbon steel,Stainless steel,Duplex Stainless steel Brass,Copper,Plastic,Aluminum
GradeSS304 SS316 SS316L Gr4 Gr8 F436 Gr2 Gr5
FinishZinc Plated, plain finish or as appointed such as Black oxide, Nickel, Chrome etc.
PackingPlastic Bags+Chipboard Cartons+Plywood Pallet
ApplicationMotorcycle / Buliding / Mechanical Machine / Automobile /Home Decorating etc..
Payment TermT/T,L/C,Western Uion
RemarksSamples are free.

 

Application:

 

Important parts of the spring washer locking effect, use less as far as possible or not, and adopt self-locking structure.For high speed screw (pneumatic or electric) spring washer, had better use the washer of surface phosphating treatment, improve its wearing performance, otherwise easy friction heat and burn out or mouth, or even damaged by surface fitting.For thin plate joint, spring washer structure should be adopted.According to statistics, spring washer to use less and less in the car.

 

Advantages:

 

1. Professional Manufacturer: All of our Fastener are designed and manufactured according to buyers’ specification and performance.

2. Quality is guaranteed: Durability testing and critical technical design to enhance fasteners lifetime.

3. Cost effective: Competitive prices with professional factory supply Perfect fastening solution with 10 years experiences to solve your problem: Wide range of parts selection.

4. Customized Ideal Fasteners: customized services according to the samples and drawings offered.



 

 

Hot Products

DIN976 DIN975 A2 Stainless Steel 304 316 All Full Threaded Rod bolts and nuts Description: A ...
M8x60mm 316 A4 Stainless Steel 304 All Fully Threaded Bar and Nuts ​ Description: Threaded rod, also ...
Finished carbon steel All Bar Grade 5 Grade 8 Fully Black Threaded Rod Description: A threaded rod, ...
1000mm Length M10 DIN 975 DIN976 Stainless Steel Fully Threaded Rod 1. Product Description Threaded ...
carbon steel Grade 8.8 / 10.9 / 12.9 Zinc Plated Metric Fully Threaded Rod Description: Threaded rod ...
A4 50 A4 70 A4 80 316L 304 Stainless Steel Fully Threaded Rod Stud Bar Description: DIN975 DIN976 A4...