High Pellet Forming Rate 11kw 300kg/H Biomass Pellet Mill Machine

High Pellet Forming Rate 11kw 300-400kg/H Biomass Pellet Mill Machine

Description of Biomass pellet mill

Biomass pellet mill can take the agricultural and forestry processing wastes such as sawdust, straw, rice husk, bark and other biomass as raw materials, and solidify them into high-density pellet fuel through pretreatment and processing. It can not only save energy, but also reduce emissions, economic and social benefits. It is an efficient and clean renewable energy. Biomass pellet machine is divided into flat biomass pellet and ring biomass pellet and updated products. Our company mainly produce the flat biomass pellet machine.

Features of biomass pellet mill

1) Table performance, low energy consumption

2) Convenient repairing and maintenance

3) Low failure rate, easy operation

4) High pellet forming rate

5) Pellet with high density

Materials of biomass pellet mill

Biomass pellet machine is a production-oriented machine which uses eucalyptus, pine, birch, poplar, fruit wood, crop straw and bamboo chips as sawdust to process into biomass fuel. The raw material sources of biomass particles are very wide, including sawdust, wood shavings, bark, sanding powder, waste wood and branches produced in wood processing and wood-based panel production; all kinds of straw produced after crop harvest, and rice husk, sunflower seed shell, peanut shell, etc. And the moisture of material is must be 10-18%. 

Technical parameters of biomass pellet mill

Working process of biomass pellet mill

The motor drives the spindle through the hypoid bevel gear, and the spindle drives the press roll to rotate. When processing raw materials, the raw materials are sent to the feeding chamber of the flat die machine, and the materials fall on the flat die. The main shaft drives the press roller to rotate. The roller continuously rolls through the material layer and extrudes the material into the die hole. The material experiences the process of forming and maintaining shape in the die hole. After a certain period of time, the material is extruded in a cylindrical state. The rotating cutter cuts off the material and forms particles, which are sent out by the material throwing plate.