Industrial Copper Separator Machine Ac Aluminum Copper Radiator Shredder

Application of radiator recycling machine

This copper-aluminum separator can handle all kinds of water tanks, convection radiator, steel radiator, aluminum radiator, copper radiator, stainless steel radiator, copper aluminum radiator, and the original cast iron radiator.

Attention for radiator recycling machine

1). This radiator recycling machine can process the radiators which is flat and non-deformed .
2). The diameter centerline of the copper pipes in level need to be 19mm or 21mm or 25 mm , if your radiator is other size , we also can customized for you .

3). Before feeding, cut the steel plates off.
4). The machine can only handle one to two layers once. If your radiators are above two layers, cut them into one layer or two layers before processing.
5). There are 3 feeding holes in the machine comply with copper center distance 25mm, 21mm and 19mm respectively. So the feeding width are limited. Before feeding you need to cut wide radiators narrow to fit feeding hole width.
6). The machine relies on the dual action of blades and pressing wheel to cut the aluminum shell to separate copper from aluminum. If the in the output materials, aluminum shell are not separated or cut too deep, please let the blades and blades shaft are in their due position by adjusting the knobs on the top of the machine.