Typical engine data | | |
| Dry
weight........................................................................................................................... | -kg | 1905 |
| Distance between barycenter and flywheel cover back
face...................................................... | -mm | 721 |
| Distance between barycenter and crankshaft center line (above
crankshaft)............................... | -mm | 229 |
| Firing
order........................................................................................................................... | | 1-5-3-6-2-4 |
| | |
Installment of engine | | |
| Maximum(static state) bending moment of the back face of the
cylinder block .......................... | -N.m | 1356 |
| | |
Exhaust system | | |
| Maximum exhaust back
pressure.......................................................................................... | -kPa | 10 |
| | |
Turbocharge inter-cooling system | | |
| Maximum allowable temperature difference between manifold
temperature and inlet temperature. | -℃ | 25 |
| Maximum allowable pressure difference between before and after the
cold ................................ | -kPa | 13 |
| Maximum allowable inlet manifold temperature(when environment
temperature is 25℃).............. | -℃ | 50 |
| Maximum allowable inlet manifold
temperature....................................................................... | -℃ | 58 |
| | |
Air introduction system | | |
| Maximum allowable intake resistance(use heavy air filter
)...................................................... | | |
| Cleanly filter
element............................................................................................................ | -kPa | 3.7 |
| Duty filter
element................................................................................................................ | -kPa | 6.2 |
| Maximum temperature rise degree when outside air in the
turbocharger inlet............................. | -℃ | 17 |
| | |
Lubrication system | | |
| Oil pressure range when normal operation | | |
| | low idle
system................................................................................................... | -kPa | at least 138 |
| | Rated point
speed................................................................................................ | -kPa | 345-483 |
| Maximum oil temperature in oil pan
...................................................................................... | -℃ | 121 |
| Maximum total volume of lubrication
system........................................................................... | -litre | 50 |
| Use Bias oil pan tilt angle | | |
| | Upward in the
front................................................................................................ | - º | 30 |
| | Downward in the
front............................................................................................ | - º | 30 |
| | Side to
side......................................................................................................... | - º | 30 |
| | |
Cooling system | | |
| Diesel engine coolant volume(only engine)
............................................................................. | -litre | 30 |
| Maximum cooling cycle resistance in Engine
external............................................................. | -kPa | 55 |
| Static maximum height of coolant above engine crankshaft center
line...................................... | -m | 18.3 |
| Standard thermostat operating range
.................................................................................... | -℃ | 82 - 93 |
| Maximum coolant temperature when standy power/rated
power................................................ | -℃ | 104/100 |