Power 60cm USB 3.0 Pcie Riser Cable , PCI-E Express 1X To 16x Riser
- Applying all the advantages of
- Items are brand new and tested before shipping.
- Lower factory price
- High reliability ,has a very stable performance.
- Rapid signal transduction
- Pure manual welding, rugged design safe and high
- Best qualtiy and excellent service
- Warranty 1 years
D interface (molex)
pci-e 1x to 16x usb 3.0
1X 2X 4X 8X 16X to 16x
The second generation
Blue and Green
1). Applying all the advantages of
2). items are brand new and tested before shipping.
3). High reliability ,has a very stable performance.
4). Rapid signal transduction
5).pure manual welding, rugged design safe and high
A: graphics power using two FP solid capacitors, the card supply more safety.
B: transfer cassette port or 4PIN interface strengthen the power supply, so that the graphics power independence
from the motherboard, so as to reduce the burden on the graphics card.
C card slot: the original goods into the connector, the graphics card is better.
D:PCI-E connector using multilayer shielding wire, the longest can take 3M without signal attenuation
E: comparison of soft wire, wiring is convenient, want to put it on the card.
F:PCI-E connector plug all gold, more wear and increase conductivity.
G: slot with a fixed buckle, convenient disassembly and fixed graphics card, the card will not fall off from the slot.
Matters needing attention:
1 the extension line is applicable to the motherboard PCI-E slot (1X 2X 4X 8X 16X). Please use the insert floppy
drive power line. Plug PCI-E to extend the line must be computer off the wire and then plug. When in use, must
2 The supporting rod is customized, don't literally get line into. Remember!
3 wire must see clearly the direction, do not insert or insert deflection, prevent burning device, plug line to hold the
device and then plug line, to avoid excessive force Reggie socket pin interrupt.
4 small 4PIN head (floppy disk interface) is a standard part, with anti lock buckle, inserted into the middle of a
buckle seat after the hook seat, so it is not easy to fall off. When the swap lines must be careful, don't pull line,
such as hard to pull the thread or transposons plastic pull out, we can first put line to pull up, namely the first
buckling position disengaged from the seat, and then pull out.
5 As suggestion : dual core graphics and the motherboard is 16X also suggest using the old cable!!!
We are professional manufacturer a high-tech electronic goods manufactuer which has the ability of R&D and
manufactory in china established in 2006.The main products are: SSD, CF, card, MSATA, Halfslim, DOM, PCIe
1/4/8/16x to 16x, PCIe USB3.0 riser, USB LAN etc. Our products sell well in North America, West Europe and
Australia. Our company insists on the principle of "Good service, the best quality and competitive price". We can
provide a complete production line to meet different application's needs.