HeBei BoTou Safety Tools Co.,Ltd |
|
Non Sparking Non Magnetic Tool Kits 36 Pcs By Copper Beryllium
Specs:
Items | Specs |
Tweezers | 200mm |
Probe-Straight and Right Angled | 187mm |
Knife | 185mm |
Scissors | 225mm |
Hacksaw Frame | 500mm |
Hacksaw Blade | 300mm |
Putty Knife/Scraper | 40*200mm |
Wire Brush | 350*28mm |
Screwdriver ,Flat | 3*50;.4.5*150;6*100;8*150;10*300mm |
Screwdriver,Offset | 6*150;6*130;10*140mm |
Screwdriver,Cross Head | #1*75;#2*125;#3*200;#4*300mm |
Pliers,Adjustable | 200mm |
Pliers,Flat Nose | 150mm |
Pliers,Snipe Nose | 150mm |
Pliers,Side Cutter | 150mm |
Pliers,Wire Snipper | 170mm |
Pliers,Round Nose | 150mm |
Pliers,Combination | 200mm |
Adjustable Spanner | 18*150;30*250mm |
Adjustable Pipe Wrench | 50*350mm |
Ball Pein Hammer | 0.68Kg |
Club Hammer | 1.8Kg |
Flat Chisel. | 16*160;25*230mm |
Pry Bar | 16*455mm |
Swan Neck Bar | 455mm |
Ratchet | 1/2" Drive |
Sliding Bar | 1/2" Drive |
Extension Bar | 1/2" *100;1/2"*250mm |
Universal Joint | 1/2" Drive |
1/2" Drive Socket,Inch | 7/16";1/2";9/16";5/8";11/16";3/4";13/16";7/8";15/16";1";1-1/16";1-1/8" |
Bex Key,Matric | 1.5;2;2.5;3;4;5;6;8;10 |
Bex Key,Inch | 1/16";5/64";3/32";1/8";5/32";3/16";7/32";1/4";5/16";3/8";7/16" |
ppp
--
A 85-piece non-magnetic and non-sparking EOD tool kit for bomb disposal and demolition operations.
The EOD Non-Magnetic tool kits give the capability to deal with older unexploded ordnance (UXO) while meeting the challenges of modern and potentially unknown types of weapons and devices. This comprehensive set of non-magnetic and non-sparking tools provides explosives disposal specialists with a definitive, dependable and versatile equipment resource. Experience has proven that all operators can use this equipment with great confidence.
The EOD Non-Magnetic tool kits have been developed in response to the specific requirements of NATO EOD units, and are certified to NATO STANAG 2897 EOD Annex C (NATO Standardization Agreement for Magnetic Signature Design Criteria for EOD Equipment).
The inherent non-sparking property of EOD Non-Magnetic tools make them suitable for all EOD/IEDD tasks where an external hazard or risk of explosion exists (e.g. close proximity to oil fuel tanks or inside flammable gas-filled compartments).