|
[China]
Trade Verify
Address: Baisha Sancun Industrial Zone, Humen Town, Dongguan City, Guangdong Province, China
Contact name:He
Dongguan Chenglue Electronic co.,Ltd |
|
Verified Suppliers
|
|
Small Size 471K 400VAC Y1 Safety Capacitor Often Use High-Voltage
Ceramics
There are some variable elements in the circuit, such as inductors,
capacitors, etc. These variable elements generally can only bring
about or reduce the relative change (or reduction) of the
sinusoidal quantity of its corresponding frequency. For example,
when the switch is turned on, the alternating current will change
repeatedly between Y1 and Y2, and the electromagnetic field
generated at this time (a magnetic field similar to the light
emitted by the light source) will naturally generate a force
between the wires
Feature
1. Small size.
2. AC capacitors that have passed and complied with safety
certification.
3. The high-frequency loss is small, and it can withstand the
impact of AC peak surges.
4. Strong over-current capability, small capacity and loss
attenuation.
5. Long service life.
6. The rated voltage of Y1 is 400-500VAC, and the experimental
voltage is 4000VAC.
7. Y capacitors often use high-voltage ceramics.
8. Y1 is a double-insulated Y capacitor, which is used to bridge
the primary and secondary sides.
9. Flame-retardant epoxy resin package.
APPLICATIONS
High voltage DC power supplies or discharges.
High frequency AC circuits.
Noise suppressor or horizontal out-put circuits.
ITEM |
SPECIFICATION |
TEST METHOD AND CONDITION | ||||||||||||||||
Temp Cycling
|
Appearance |
No marked defect |
The capacitor shall be introduced into the test chamber, and shall be exposed to the temperature conditions as shown in table at 5 cycles. pretreatment: The capacitor shall be placed at 125±2℃ for 1 hour, then placed at room condition for 24±2hours before initial measurement. Post-treatment: Capacitor shall be stored for 24±2 hours at room conditions.
| |||||||||||||||
Capacitance Change | B:±10% max E:±20% max F:±30% max | |||||||||||||||||
D.F. | B,E:5.0% max F:7.0% max | |||||||||||||||||
I.R. | 1000MΩ min | |||||||||||||||||
Humidity (Under Steady State) |
Appearance |
No marked defect |
Set the capacitor for 500±12 hours at 40±2℃ in 95±3% RH. pre-treatment: The capacitor shall be placed at 125±2℃ for 1 hour, then placed at room condition for 24±2 hours before initial measurement. Post-treatment: The capacitor shall be stored for 24±2 hours at room condition. | |||||||||||||||
Capacitance Change | B:±10% max E:±20% max F:±30% max | |||||||||||||||||
D.F. | B,E:5.0% max F:7.0% max | |||||||||||||||||
I.R. | 1500MΩ min | |||||||||||||||||
Dielectric Strength |
Per Item 8 | |||||||||||||||||
Life Test |
Appearance |
No marked defect | Apply a voltage of 500V.AC,except that once each hour the voltage is increased to 1000V.AC for 0.1sec.that shall be maintained for 1000±48 hours at 125±2℃. Pre-treatment: Capacitor shall be stored at 125±2℃ for 1 hour, then placed at room condition for 24±2H before initial measurements. Post-treatment: Capacitor shall be stored for 24±2 hours at room condition. | |||||||||||||||
Capacitance Change | B:±10% max E:±20% max F:±30% max | |||||||||||||||||
D.F. | B,E:5.0% max F:7.0% max | |||||||||||||||||
I.R. | 1500MΩ min | |||||||||||||||||
Product Voltage, Material, Size reference Table
| Product and size code | Rated AC Voltage | Temperature Characteristic | Rated Capacitance | Tolerance of Capacitance | Size (mm) | |||
| D.max | T.max | P±0.8 | d±0.05 | |||||
| Q065B□□100K□ | 400Vac | (B) | 10pF | K | 6.5 | 4.5 | 10 | 0.55 |
| Q065B□□150K□ | 15pF | 6.5 | 4.5 | 10 | 0.55 | |||
| Q070B□□220K□ | 22pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q070B□□330K□ | 33pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q070B□□470K□ | 47pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q070B□□560K□ | 56pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q070B□□620K□ | 62pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q070B□□820K□ | 82pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q065B□□101K□ | 100pF | 6.5 | 4.5 | 10 | 0.55 | |||
| Q065B□□221K□ | 220pF | 6.5 | 4.5 | 10 | 0.55 | |||
| Q075B□□331K□ | 330pF | 7.5 | 4.5 | 10 | 0.6 | |||
| Q085B□□471K□ | 470pF | 8.5 | 4.5 | 10 | 0.6 | |||
| Q085B□□561K□ | 560pF | 8.5 | 4.5 | 10 | 0.6 | |||
| Q095B□□681K□ | 680pF | 9.5 | 4.5 | 10 | 0.6 | |||
| Q110B□□821K□ | 820pF | 11.0 | 4.5 | 10 | 0.6 | |||
| Q115B□□102K□ | 1000pF | 11.5 | 4.5 | 10 | 0.6 | |||
| Q065E□□471K□ | (E) | 470pF | 6.5 | 4.5 | 10 | 0.55 | ||
| Q075E□□561K□ | 560pF | 7.5 | 4.5 | 10 | 0.6 | |||
| Q075E□□681K□ | 680pF | 7.5 | 4.5 | 10 | 0.6 | |||
| Q075E□□821K□ | 820pF | 7.5 | 4.5 | 10 | 0.6 | |||
| Q085E□□102K□ | 1000pF | 8.5 | 4.5 | 10 | 0.65 | |||
| Q095E□□152M□ | 1500pF | M | 9.5 | 4.5 | 10 | 0.65 | ||
| Q105E□□222M□ | 2200pF | 10.5 | 4.5 | 10 | 0.65 | |||
| Q115E□□332M□ | 3300pF | 11.5 | 4.5 | 10 | 0.65 | |||
| Q065F□□102M□ | (F) | 1000pF | 6.5 | 4.5 | 10 | 0.55 | ||
| Q075F□□152M□ | 1500pF | 7.5 | 4.5 | 10 | 0.6 | |||
| Q085F□□222M□ | 2200pF | 8.5 | 4.5 | 10 | 0.6 | |||
| Q100F□□332M□ | 3300pF | 10.0 | 4.5 | 10 | 0.65 | |||
| 4700pF | 11.5 | 4.5 | 10 | 0.65 | ||||
Specification and Test Method
ITEM | SPECIFICATION | TEST METHOD AND CONDITION | |||||||||||||
Storage Temp. Range | -40℃~+125℃ | ||||||||||||||
Operating Temp. Range | -25℃~+125℃ | ||||||||||||||
| Appearance has | | |||||||||||||
| | | |||||||||||||
| | Temp. 20±2℃ | |||||||||||||
Dissipation Factor | B,E:2.5% max | | |||||||||||||
| 10,000MΩ | | |||||||||||||
| | | | ||||||||||||
| | | |||||||||||||
| B:-10~+10% |
| |||||||||||||
Production Process
