|
[China]
Trade Verify
Address: Baisha Sancun Industrial Zone, Humen Town, Dongguan City, Guangdong Province, China
Contact name:He
Dongguan Chenglue Electronic co.,Ltd |
|
Verified Suppliers
|
|
Low Loss 561K 400VAC Y1 Safety Capacitor AC Capacitors That Have
Passed And Complied With Safety
The Y1 capacitor is a safety capacitor, and such a capacitor will
not cause electric shock after the capacitor fails, and will not
endanger personal safety. It includes two types of X capacitors and
Y capacitors. X capacitors are capacitors connected between the two
lines of the power line (L-N), and metal film capacitors are
generally used; Y capacitors are connected between the two lines of
the power line and the ground (L-E , N-E) capacitance, generally
appear in pairs. Based on the limitation of the leakage current,
the value of the Y capacitor should not be too large. Generally,
the X capacitor is uF level, and the Y capacitor is nF level. The X
capacitor suppresses differential mode interference, and the Y
capacitor suppresses common mode interference.
Y1 Safety Capacitor .pdf
Features:
Operating temperature range: -25 to +85 celium degree.
Working voltage: DC 1, 2,3, 6.3, 10 and 15kV
Withstanding voltage: 1.5 times of working voltage 1kV <=UR
<=10kVUT = 1. 5UR+500V, UR <=10kV, UT = 1.5UR
Capacitance: measured at 20 +-2celium degree, with 5Vrms
maximumClass I 1+-0.2MHz and class II 1+-0.2kHz
Capacitance tolerance: J: +-5%, K: +-10%, M: +-20% and Z: +80%-20%
Dissipation factor (DF): same condition as the capacitanceSL tgd
<= 0.15%N3300 tgd <= 0.4%Y5P tgd <= 2.5%Z5U tgd <=
2.5%Z5V tgd <= 2.5%Bn tgd <= 0.5%Y5R tgd <= 0.35%
Insulation resistance (IR): with rated voltage 500V test 60
+-5secondsIR >= 10,000MQ
Temperature characteristic: SLN3300, Y5P, Z5U, Z5V and Y5R
Advantages
1. We have all models of material, save you time looking for it.And
recommend materials for you if you need.
2. With the same quality products,we can give you best price.
Inquiries to after-sale, we will provide good service,such as
update product status, technical support etc.(24 hour online)
3. We have many stocks, and the delivery time usually is short.
Application range:
Frequency conversion
frequency division and other AC
large pulse circuits
especially audio frequency divider circuits with high fidelity
requirements
ITEM |
SPECIFICATION |
TEST METHOD AND CONDITION | ||||||||||||||||
Temp Cycling
|
Appearance |
No marked defect |
The capacitor shall be introduced into the test chamber, and shall be exposed to the temperature conditions as shown in table at 5 cycles. pretreatment: The capacitor shall be placed at 125±2℃ for 1 hour, then placed at room condition for 24±2hours before initial measurement. Post-treatment: Capacitor shall be stored for 24±2 hours at room conditions.
| |||||||||||||||
Capacitance Change | B:±10% max E:±20% max F:±30% max | |||||||||||||||||
D.F. | B,E:5.0% max F:7.0% max | |||||||||||||||||
I.R. | 1000MΩ min | |||||||||||||||||
Humidity (Under Steady State) |
Appearance |
No marked defect |
Set the capacitor for 500±12 hours at 40±2℃ in 95±3% RH. pre-treatment: The capacitor shall be placed at 125±2℃ for 1 hour, then placed at room condition for 24±2 hours before initial measurement. Post-treatment: The capacitor shall be stored for 24±2 hours at room condition. | |||||||||||||||
Capacitance Change | B:±10% max E:±20% max F:±30% max | |||||||||||||||||
D.F. | B,E:5.0% max F:7.0% max | |||||||||||||||||
I.R. | 1500MΩ min | |||||||||||||||||
Dielectric Strength |
Per Item 8 | |||||||||||||||||
Life Test |
Appearance |
No marked defect | Apply a voltage of 500V.AC,except that once each hour the voltage is increased to 1000V.AC for 0.1sec.that shall be maintained for 1000±48 hours at 125±2℃. Pre-treatment: Capacitor shall be stored at 125±2℃ for 1 hour, then placed at room condition for 24±2H before initial measurements. Post-treatment: Capacitor shall be stored for 24±2 hours at room condition. | |||||||||||||||
Capacitance Change | B:±10% max E:±20% max F:±30% max | |||||||||||||||||
D.F. | B,E:5.0% max F:7.0% max | |||||||||||||||||
I.R. | 1500MΩ min | |||||||||||||||||
Product Voltage, Material, Size reference Table
| Product and size code | Rated AC Voltage | Temperature Characteristic | Rated Capacitance | Tolerance of Capacitance | Size (mm) | |||
| D.max | T.max | P±0.8 | d±0.05 | |||||
| Q065B□□100K□ | 400Vac | (B) | 10pF | K | 6.5 | 4.5 | 10 | 0.55 |
| Q065B□□150K□ | 15pF | 6.5 | 4.5 | 10 | 0.55 | |||
| Q070B□□220K□ | 22pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q070B□□330K□ | 33pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q070B□□470K□ | 47pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q070B□□560K□ | 56pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q070B□□620K□ | 62pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q070B□□820K□ | 82pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q065B□□101K□ | 100pF | 6.5 | 4.5 | 10 | 0.55 | |||
| Q065B□□221K□ | 220pF | 6.5 | 4.5 | 10 | 0.55 | |||
| Q075B□□331K□ | 330pF | 7.5 | 4.5 | 10 | 0.6 | |||
| Q085B□□471K□ | 470pF | 8.5 | 4.5 | 10 | 0.6 | |||
| Q085B□□561K□ | 560pF | 8.5 | 4.5 | 10 | 0.6 | |||
| Q095B□□681K□ | 680pF | 9.5 | 4.5 | 10 | 0.6 | |||
| Q110B□□821K□ | 820pF | 11.0 | 4.5 | 10 | 0.6 | |||
| Q115B□□102K□ | 1000pF | 11.5 | 4.5 | 10 | 0.6 | |||
| Q065E□□471K□ | (E) | 470pF | 6.5 | 4.5 | 10 | 0.55 | ||
| Q075E□□561K□ | 560pF | 7.5 | 4.5 | 10 | 0.6 | |||
| Q075E□□681K□ | 680pF | 7.5 | 4.5 | 10 | 0.6 | |||
| Q075E□□821K□ | 820pF | 7.5 | 4.5 | 10 | 0.6 | |||
| Q085E□□102K□ | 1000pF | 8.5 | 4.5 | 10 | 0.65 | |||
| Q095E□□152M□ | 1500pF | M | 9.5 | 4.5 | 10 | 0.65 | ||
| Q105E□□222M□ | 2200pF | 10.5 | 4.5 | 10 | 0.65 | |||
| Q115E□□332M□ | 3300pF | 11.5 | 4.5 | 10 | 0.65 | |||
| Q065F□□102M□ | (F) | 1000pF | 6.5 | 4.5 | 10 | 0.55 | ||
| Q075F□□152M□ | 1500pF | 7.5 | 4.5 | 10 | 0.6 | |||
| Q085F□□222M□ | 2200pF | 8.5 | 4.5 | 10 | 0.6 | |||
| Q100F□□332M□ | 3300pF | 10.0 | 4.5 | 10 | 0.65 | |||
| 4700pF | 11.5 | 4.5 | 10 | 0.65 | ||||
Specification and Test Method
ITEM | SPECIFICATION | TEST METHOD AND CONDITION | |||||||||||||
Storage Temp. Range | -40℃~+125℃ | ||||||||||||||
Operating Temp. Range | -25℃~+125℃ | ||||||||||||||
| Appearance has | | |||||||||||||
| | | |||||||||||||
| | Temp. 20±2℃ | |||||||||||||
Dissipation Factor | B,E:2.5% max | | |||||||||||||
| 10,000MΩ | | |||||||||||||
| | | | ||||||||||||
| | | |||||||||||||
| B:-10~+10% |
| |||||||||||||
Production Process
