Home Companies Shenzhen Saef Technology Ltd.

1.3 Inch Monochrome OLED Display Module 128x64 Pixel White/Blue Optional

Contact Us

[China]

Trade Verify

Address: 3 FL., Yuan Yi Yuan Industrial Park, QianJing Rd, XiXiang, BaoAn,ShenZhen, China

Contact name:Christina

Shenzhen Saef Technology Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

1.3 Inch Monochrome OLED Display Module 128x64 Pixel White/Blue Optional

Country/Region	china
City & Province	shenzhen
Categories	Electronic Signs

Product Details

1.3 inch monochrome OLED display module 128x64 pixel Product Drawing Product Introduction

SFOS130JY-7130AP OLED Display Module is a 128x64 resolution COG graphic display, diagonal size 1.3 inch. The OLED model is designed as industrial grade which is having the advantage of competitive price. The module is built-in with CH1116G IC; it supports 8-bit 68XX/80XX Parallel, 3/4-wire SPI, I2C interface. The supply voltage for Logic is 4V, supply voltage for display is 14V, operating current for VDD is 180μA, driving duty 1/64. SFOS130Y-7130AP OEL Display Module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +80℃.

Product:	1.3 Inch OLED Display Module
Number Of Pixels:	128x64 Graphics
Display Mode:	Passive Matrix
Driver IC:	CH1116G Or Equivalent
Display Color:	Mono White, Blue, Optional
Drive Duty:	1/64 Duty
Panel Size:	34.5 X 23.0 X 1.4 (mm)
Active Area:	29.42 X 14.7 (mm)
Pixel Pitch:	0.23 X 0.23(mm)
Pixel Size:	0.21 X 0.21(mm)
Interface:	8-bit 68XX/80XX, 3/4-wire SPI, I2C
Pin Number:	30 Pins
Viewing Direction:	All Viewing Angles
Connection:	Plug-in Connection
Life Time:	50,000 Hours @60cd/m2
Compliance:	REACH & RoHS Compliant

Features

1. This 1.3-inch mini OLED display has a resolution of 128X64 and features a CH1116 chipset.

2. This 1.3-inch OLED display module has ultra-low power consumption: full screen illumination 0.08w.

3. This micro OLED display 1.3 inch is plugging type, we can customize FPC (length, interface, plugging type connection,etc.)according to customer requirements.

4. This 1.3 inch 128x64 OLED product is designed for 8-bit 68XX/80XX, 3/4-wire SPI, I2C interface.

5. This 1.3 inch OLED display module has an infinite viewing angle "up to 175 degrees"..

6. This OLED 1.3 inch 128x64 product is suitable for wearable devices, smart home applications, etc.

7. This SPI/IIC OLED 1.3 inch product has a self-illuminating design, no backlight is required, and the display can be self-illuminated; It has high-contrast, bright and clear dots that are very readable even in tiny fonts.

10. This 1.3-inch OLED display has a faster response time of "10 microseconds at +25 °C".

10.This 1.3 inch mono OLED product has high brightness and this product has a contrast ratio of up to 2000:1.

11. This low cost 1.3 inch OLED product has lower power consumption - reducing CO2 emissions.

1.3 inch monochrome OLED display module 128x64 pixel Product Drawing

Pin Definition

Absolute Maximum Ratings

Note 1: All the above voltages are on the basis of “VSS = 0V”.

Note 2: When this module is used beyond the above absolute maximum ratings, permanent breakage of themodule may occur. Also, for normal operations, it is desirable to use this module under theconditions according to Section 3. “Optics & Electrical Characteristics”. If this module is usedbeyond these conditions, malfunctioning of the module can occur and the reliability of the modulemay deteriorate.

Note 3: The defined temperature ranges do not include the polarizer. The maximum withstoodtemperature of the polarizer should be 80°C.

Note 4: VCC = 12.0V, Ta = 25°C, 50% Checkerboard.Software configuration follows Section 4.4 Initialization.End of lifetime is specified as 50% of initial brightness reached. The average operating lifetime atroom temperature is estimated by the accelerated operation at high temperature conditions.

Optics Characteristics

DC Characteristics

1.3 inch monochrome OLED display module 128x64 pixel Product Drawing Product Image

Factory Facilities and Certificates

SAEF Technology's graphic OLED display are available in three mechanical structures include COB, COG and TAB passive matrix technology. Available graphic monochrome OLED resolution in 50x16 OLED graphic display, 64x128 OLED, 100x16 OLED, 100x32 graphic OLED, 200x16 graphic OLED, OLED 128x32, OLED display 128x64, OLED 128x128, and 256x64 OLED Display. The graphic OLED display in the SAEF product range have on-board controllers and interfaces include parallel, serial, and I2C OLED, SPI OLED. These OLED display modules have driven voltages of 3V, or 5V depending on resolution/color.

SAEF offers a wide range of OLED display modules in sizes from 0.42" to 5.5" OLED, such as 0.42" micro OLED Display, 0.49" OLED Display, 0.66" mini OLED Display, 0.69" OLED, 0.77" OLED, 0.87" OLED, 0.91" OLED Display, 0.95" OLED, 0.96" OLED Display, 1.3" OLED Display, 1.5" OLED Display, 2" OLED , 2.4" OLED , 2.7" OLED Display, 5.5" OLED Display, and custom design solutions.

Search Keyword:

128x64 oled, oled 128x64 , 1.3 oled, 1.3" oled, 1.3 inch oled, oled 1.3", I2C OLED display 1.3, SPI OLED display 1.3, CH1116 OLED Display, CH1116 OLED, micro OLED, 1.3 inch mini OLED display, thin OLED display , tiny OLED display, round OLED display, color OLED display and OLED touch display.