Active Member
|
[China]
Address: No 1288 Guangrui Road , Liangxi district , WUXI City , Jiangsu province ,P.R,CHINA.
Contact name:Lucy
Wuxi Zhongxin Special Steel Co.，Ltd |
|
|
Thickness 0.18mm Two Sides Copolymer Coated Copper Tape For Cable Armouring, Shielding
Double Side copolymer coated copper tape ,which also named as
copolymer laminated copper tape, copper copolymer lamination tape,
EAA-AL-EAA lamination copper tape, EVA copolymer coated copper tape
with two sides, Polyster coated copper tape with two sides, plastic
coated copper tape, It applies for medium and high voltage power
cables as a shield/moisture barrier as a moisture/ chemical barrier
for cable core, it consists of a copper tape coated on double side
with a special ethylene copolymer color-coded green.
The main advantages of our products includes: Firstly, Copolymer
coated on the copper tape is highly heated EAA with good
sealability, Comparing with normal PE, EAA has lower bonding
temperature and higher heat sealability, which make longitudinal
winding technique more simply and convenient in cable production.
Secondly, our product has low coefficient of friction, which is
lower than 30-50% of same factories. Using this low coefficient of
friction products, copolymer coated metal tape has small
deformation and low mechanical losses in production, which can
improve the stability of fiber optic cable and service life.Copolymer coated copper tape applies for medium and high voltage
power cables as a layer of shield/moisture barrier for cable core,
if consists of copper tape coated with single side copolymer. The
coating forms a strong moisture-resistant bond to copper substrate,
also form strong polymeric bonds to zero halogen, polyethylene and
chlorinated polyethylene jacketing resins during jacket extrusion
process.
| Property | Unit | Values | Test Method | |
| Thickness | Cu | mm | 0.08-0.5 | |
| EAA | mm | 0.05 | ||
| Tensile Strength | MPa | ≥180 | ASTM B152 | |
| Elongation at break | % | ≥20 | ASTM B152 | |
| Peel strength | N/cm | ≥5 | ASTM B694 | |
| Heat Seal strength | N/cm | ≥17.5 | ASTM B694 | |
| Corrosion resistance (0.1 mol/L,Hcl,480h) | Grade | ≥7 | ﹍﹍﹍ | |
| Filler Resistance (68℃±1℃,168h) | ﹍﹍﹍ | No Delamination | ASTM B694 | |
| Peel strength after water bath (68℃±1℃, 168h) | N/cm | ≥5 | ASTM B694 | |
| Dielectric Strength (one side DC 1kv,1min,two sides DC 2kV,1min) | ﹍﹍﹍ | No Break | ﹍﹍﹍ | |
| conductivity | IACS | ≥90% | ||
Q: Would you provide samples For free?
A: Yes . with on stock specification We provide samples For Free . Freight charge collect
