Wuxi Zhongxin Special Steel Co.,Ltd |
|
LDX 2101 is a lean duplex stainless steel designed for general
purpose use. Like other duplex stainless steels, LDX 2101®provides
both superior strength and chloride stress corrosion cracking
resistance compared to 300 series stainless steels. The use of
manganese ensures proper ferrite-austenite phase balance, while
allowing a reduction in nickel content. As a result, LDX
2101 is priced competitively with 304/304L and 316/316L
stainless steels.
The combination of a duplex structure and high nitrogen content
provide significantly higher strength levels than 316/316L
stainless steel. Often a lighter gauge of LDX 2101 can be
utilized, while maintaining the same strength as a 300 series
fabrication. The resultant weight savings can dramatically reduce
the material and fabrication costs of a component.
Duplex LDX 2101 UNS S32101 specification
ASTM A 240, EN 1.4162, UNS S32101, Werkstoff 1.4162
Material No. | EN Designation | UNS |
1.4162 | X2CrMnNiN22-5-2 | S32101 |
Width: 600mm~2030 mm
Thickness: 2~120.0 mm
Length: 300~6000 mm , Max 18000 mm
Surface Finish: No.1, 2B, BA, No.3, No.4, No.5, No.8, HL, Etching, SB, Ti-coating,color-coating ,embossing .
DIN 1.4162
JIS LDX 2101
EN X2CrMnNiN21-5-1
EN 1.4162
The chemical composition of stainless steel grade LDX 2101 is outlined in the following table.
Element | Content (%) |
---|---|
Chromium, Cr | 21-22 |
Manganese, Mn | 4-6 |
Nickel, Ni | 1.35-1.70 |
Silicon, Si | 1 max |
Nitrogen, N | 0.20-0.25 |
Copper, Cu | 0.10-0.80 |
Molybdenum, Mo | 0.10-0.80 |
Phosphorous, P | 0.040 max |
Carbon, C | 0.040 max |
Sulfur, S | 0.030 max |
Iron, Fe | Balance |
The physical properties of stainless steel grade LDX 2101 are tabulated below.
Properties | Metric | Imperial |
---|---|---|
Density | 7.69 g/cm3 | 0.278 lb/in3 |
Melting point | 1385-1443°C | 2525- 2630°F |
The following table shows mechanical properties of stainless steel grade LDX 2101 (cold rolled plate and sheet).
Properties | Metric | Imperial |
---|---|---|
Tensile strength (min) | 696 MPa | 101 ksi |
Yield strength (min) | 530 MPa | 77 ksi |
Elongation (min) | 30% | 30% |
Hardness, Brinell (max) | 290 | 290 |
Q: Would you provide samples For free?
A: Yes . with on stock specification We provide samples For Free . Freight charge collect
904l Stainless steel sheet ,coil ASTM B625 UNS N08904 Application