AL-6XN N08367 Precision Stainless Steel Strip Thin A182 Annealed Optional

AL-6XN Stainless Steel Strip, Foil & Wire, ASTM A182, ASTM A240, ASTM A249, ASTM A312, ASTM A479, ASTM B366, ASTM B462, ASTM B472, ASTM B564, ASTM B675, ASTM B676, ASTM B688, ASTM B691, ASTM B804

AL-6XN UNS N08367 Stainless Steel Strip Astm A182 No. 1 Extra Hard Tempered Annealed Optional  overview 

Type 347 is a stabilized austenitic stainless steel similar to type 304 with an addition of Columbium and Tantalum. The columbium serves to produce a stabilized type of stainless steel which is immune to chromium carbide precipitation. This type of grades are thus recommended for parts fabricated by welding which cannot be subsequently annealed or for parts which must operate in service between 800 - 1600 °F.

PRODUCT FORMS:

Sheet, plate , Strip, pipe ,tube ,bar ,profiles

AL-6XN stainless steel Equivalent Materials

DIN 1.4529
DIN X1NiCrMoCuN25-20-6
DIN X1NiCrMoCuN25-20-7
AFNOR Z2NCDU25-20-06Az
BS X1NiCrMoCuN25-20-7
AISI 926
AISI N08926
AISI N08367
SAE 926
SAE N08926
EN X1NiCrMoCuN25-20-7
EN 1.4529
ISO X1NiCrMoCuN25-20-7
ISO 4529-089-26-I
ISO AN52A
UNS N08367

AL-6XN UNS N08367 Stainless Steel Strip Astm A182 No. 1 Extra Hard Tempered Annealed Optional Specification and Dimension Ranges

WHAT INDUSTRY SPECIFICATIONS IS AL-6XN STAINLESS STEEL STRIP MANUFACTURED TO

 Dimension Ranges:

Standard: ASTM/EN/JIS
Thickness: 0.1mm-4.0 mm  For cold rolled 

Thickness: 0.1mm-10 mm For Hot rolled rolled

Width: 1.5mm-1200 mm
Length: coil type or it can be produced as customer requirements
Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, etc
Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge

Condition :

ANNEALED CONDITION

Ultimate Tensile Strength: 95 KSI min (655 MPA min) Yield Strength (0.2% Offset): 38 KSI min (260 MPA min) Elongation: 40%min Hardness: B95 max

TEMPERED 1/16 HARD

Ultimate Tensile Strength: 95 KSI min (655 MPA min) Yield Strength (0.2% Offset): 45 KSI min (310 MPA min) Elongation: 40% min

Tempered 1/8 Hard Ultimate Tensile Strength: 100 KSI min (690 MPA min) Yield Strength (0.2% Offset): 55 KSI min (380 MPA min) Elongation: 45% min

TEMPERED 1/4 HARD

Ultimate Tensile Strength: 125 KSI min (860 MPA min) Yield Strength (0.2% Offset): 75 KSI min (515 MPA min) Elongation: 25% min

TEMPERED 1/2 HARD

Ultimate Tensile Strength: 150 KSI min (1035 MPA min) Yield Strength (0.2% Offset): 110 KSI min (760 MPA min) Elongation: 15% < 0.15" 18% > 0.15"

TEMPERED 3/4 HARD

Ultimate Tensile Strength: 175 KSI min (1205 MPA min) Yield Strength (0.2% Offset): 135 KSI min (930 MPA min) Elongation: 10% < 0.15" 12% > 0.15"

TEMPERED FULL HARD

Ultimate Tensile Strength: 185 KSI min (1275 MPA min) Yield Strength (0.2% Offset): 140 KSI min (965 MPA min) Elongation: 8% < 0.15" 9% > 0.15"

Available Steel Grade:

Stainless steel : Type 201, 202, 205, 301, 302, 302B, 303, 303Se, 304, 304L, 302HQ, 304N, 305, 308, 309, 309S, 310, 310S, 314, 316, 316L, 316F, 316N, 317, 317L, 317LMN, 321, 330, 347, 348, 384, 405, 409, 429, 430, 430F, 430FSe, 434, 436, 442, 446, 403, 410, 414, 416, 416Se, 420, 420F, 422, 431, 440A, 440B, 440C,  630 ,  13-8 PH ,15-5 PH , 17-7 PH ,17-4 ph , 904L , A286 ,VG-10 ,  SAE 316 , SAE 316L , SAE 440 ,  SAE 420

Duplex stainless steel : 2205 , 2304 , 2507 

Nickel alloy :  

Titanium and titanium alloys  

AL-6XN UNS N08367 Stainless Steel Strip Astm A182 No. 1 Extra Hard Tempered Annealed Optional Application 

347 Stainless Steel Slit Coils / Strips UNS S34700 HL Finished 1/2 Hard Tempered Technical datasheet

CHEMICAL PROPERTIES OF AL-6XN

Carbon: 0.03 max
Manganese: 2.00 max
Silicon: 1.00 max
Chromium: 20.00- 22.00
Nickel: 23.50- 25.50
Molybdenum: 6.00-7.00
Phosphorus: 0.04 max
Sulfur: 0.03 max
Copper: 0.75 max
Nitrogen: 0.18-0.25
Iron: Balance

PHYSICAL PROPERTIES

Density: 0.291 lb/in3, 8.06 g/cm3

Electrical Resistivity: ohm-cir-mil/ft (µohms-cm): 535 (89.0)

Specific Heat: BTU/lb-°F (J/kg-K)
70 °F (21 °C): 0.113 (474)
212 °F (100 °C): 0.118 (492)
392 °F (200 °C): 0.123 (514)
572 °F (300 °C): 0.128 (536)
752 °F (400 °C): 0.133 (557)
932 °F (500 °C): 0.138 (578)
1112 °F (600 °C): 0.146 (610)
1292 °F (700 °C): 0.149 (622)
1472 °F (800 °C): 0.151 (633)
1652 °F (900 °C): 0.153 (642)
1832 °F (1000 °C): 0.156 (651)
2012 °F (1100 °C): 0.158 (660)
2192 °F (1200 °C): 0.160 (668)
2372 °F (1300 °C): 0.162 (676)
 

Thermal Conductivity: BTU-in/hr-ft-°F (W/m•K)

200 °F (93 °C): 7.50 (12.98)
400 °F (204 °C): 8.76 (15.16)
600 °F (316 °C): 10.03 (17.36)
800 °F (427 °C): 11.23 (19.43)
1000 °F (538 °C): 12.55 (21.72)
1200 °F (649 °C): 13.91 (24.07)
1400 °F (760 °C): 14.76 (25.55)
1600 °F (871 °C): 15.64 (27.07)
1800 °F (982 °C): 16.32 (28.25)
2000 °F (1093 °C): 17.26 (29.87)
2200 °F (1204 °C): 17.52 (30.32)
2400 °F (1316 °C): 18.10 (18.63)

Magnetic Permeability: H= 200 Oersteds: Annealed: 1.0028 65% cold work: 1.0028

Melting Range: 2410 - 2550 °F (1320 - 1400 °C)

AL-6XN UNS N08367 Stainless Steel Strip Astm A182 No. 1 Extra Hard Tempered Annealed Optional Products display and Package Details 

FAQ

Q: Would you provide samples For free?

A: Yes . with on stock specification We provide samples For Free . Freight charge collect

AL-6XN UNS N08367 Stainless Steel Strip Astm A182 No. 1 Extra Hard Tempered Annealed Optional Equivalent