Martensitic Precipitation Hardening Stainless Steel Strips
Stainless Steel 17-4PH Strip Coil , Slit Strips AMS 5604,
overview
Type 17-4PH is a martensitic precipitation-hardening stainless
steel that provides an outstanding combination of high strength,
good corrosion resistance, good mechanical properties at
temperatures up to 600 °F (316 °C), good toughness in both base
metal and welds, and short time, low-temperature heat treatments
that minimize warpage and scaling.
Also known as Alloy 630, type 17-4PH is the most widely used of all
precipitation-hardening steels. Compared to other PH alloys, it
requires a simple heat treatment to produce a wide range of
properties, including its high strength. It has a slightly higher
ferrite content than other PH grades, making it a bit more
magnetic. To improve formability, heat treatments may be used
before cold working.
We are suppliers of 17-4 PH stainless steel sheet and coil,Strips,
strip coil, in addition to stocking 17-4 PH round bar and plate.
Our materials can be found in aerospace applications, gas turbines,
chemical processing equipment, oil refining equipment, food
processing industries and more.
17-4 MO ferritic Stainless Steel precision Strip Coil /
Rolls Equivalent Materials
AISI 17-4PH equivalents |
0 | DIN 1.4542 |
1 | DIN X5CrNiCuNb16-4 |
2 | DIN X5CrNiCuNb17-4 |
3 | AFNOR Z7CNU15-05 |
4 | AFNOR Z7CNU17-04 |
5 | BS X5CrNiCuNb16-4 |
6 | AISI 630 | |
7 | AISI 630 (17-4PH) |
8 | SAE 630 | |
9 | SAE 17-4PH |
10 | SAE 630 (17-4PH) |
11 | JIS SUS630 |
12 | JIS SUSF630 |
13 | JIS SCS24 |
14 | EN X5CrNiCuNb16-4 |
15 | EN 1.4542 |
16 | ISO X5CrNiCuNb16-4 |
17 | ISO PP20I |
18 | ISO 4542-174-00-I |
19 | GB 05Cr17Ni4Cu4Nb |
20 | UNS S17400 |
Stainless Steel 17-4PH Strip Coil , Slit Strips AMS
5604, Specification and Dimension Ranges
Specifications and Forms
AMS 5604 Sheet, Strip Cold Rolled and Plate.
AMS 5622 (Vac Melt) Bars (Flat, Hex, Round, Square), Wire,
Forgings, Tubing and Rings
AMS 5642 Bar
AMS 5643 Bars (Flat, Hex, Round, Square), Wire, Forgings, Tubing
and Rings
AMS 7012 Powder
MIL-S-25043
ASTM A564 Grade 630
ASTM A484 / ASME SA484
ASTM A564 / ASME SA564
ASTM A693 / ASME SA693 Plate, Sheet and Strip
ASTM A56 Powder
WS 1.4542
X5CrNiCuNb16-4
AFNOR Z6CNU1704
UNS S17400
15-7 MO Stainless Steel Strip
Grade:17-4 MO
Standard: ASTM/EN/JIS
Thickness: 0.03mm-10.0 mm
Width: 1.5mm-620 mm
Length: coil type or it can be produced as customer requirements
Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K
(Mirror), HL (Hairline), Polishing Bright, etc
Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge
Tempered Condition : |
ANNEALED CONDITION | TEMPERED 1/16 HARD |
Tempered 1/8 Hard | TEMPERED 1/4 HARD |
TEMPERED 1/2 HARD | TEMPERED 3/4 HARD |
TEMPERED FULL HARD | Tempered Extra Hard |
Annealed | 2B /BA/ MIRROR / HL / SATIN / No.1 |
Available Steel Grade:
Stainless steel : Type 201, 202, 205, 301, 302, 302B, 303, 303Se,
304, 304L, 302HQ, 304N, 305, 308, 309, 309S, 310, 310S, 314, 316,
316L, 316F, 316N, 317, 317L, 317LMN, 321, 330, 347, 348, 384, 405,
409, 429, 430, 430F, 430FSe, 434, 436, 442, 446, 403, 410, 414,
416, 416Se, 420, 420F, 422, 431, 440A, 440B, 440C, 630
, 13-8 PH ,15-5 PH , 17-7 PH ,17-4 ph , 904L
, A286 ,VG-10 , SAE 316 , SAE 316L , SAE 440
, SAE 420
Duplex stainless steel : 2205 , 2304 , 2507
Nickel alloy :
Titanium and titanium alloys
AISI PH 15-7 MO Precipitation-Hardening Stainless Steel Strips UNS
S15700 AMS 5520 Application
Grade 15-7 stainless steel is used in the following applications:
- Diaphragms
- Welded and brazed honeycomb panels
- Retaining rings
- Aircraft bulkheads
- Springs
- Other applications requiring high strength at elevated temperatures
630 Stainless Steel 17-4PH Strip Coil Slit Strips AMS 5604,
Martensitic Precipitation Hardenin Technical datasheet
Chemical Composition
Chemical Composition (wt%) limits as specified in ASTM A693 (Type
630)*
Element | 17-4PH |
Carbon | 0.07 |
Chromium | 15.0-17.5 |
Nickel | 3.0-5.0 |
Copper | 3.0-5.0 |
Manganese | 1.00 |
Silicon | 1.00 |
Phosphorus | 0.040 |
Sulfur | 0.030 |
Columbium + Tantalum | 0.15-0.45 |
* Maximum, unless range is indicated
Mechanical Properties
Mechanical property requirements for solution treated product
(Condition A) as specified in ASTM A693.
Property | 17-4PH |
Yield Strength, min. (ksi) | - |
Tensile Strength, min. (ksi) | - |
Elongation, min. (%) | - |
Hardness, max. (Rb) | 38 |
Physical Properties
Physical properties for 17-4 PH stainless steel
Property | 17-4 PH |
Density, lb/in3 | 0.280 |
Modulus of Elasticity, psi | 28.5 x 106 |
Coefficient of Thermal Expansion, 68-212˚F, /˚F | 6.0 x 10-6 |
Thermal Conductivity, Btu/ft hr ˚F | 10.6 |
Specific Heat, Btu/lb ˚F | 0.11 |
Electrical Resistivity, Microohm-in | 38.6 |
630 Stainless Steel 17-4PH Strip Coil Martensitic
Precipitation Hardening Strips Package Details
Type 630 Stainless Steel 17-4PH Strip Coil , Slit Strips
Related Designation At a glance
Product Identifier: High Performance, Stainless Steel and Related
Alloys, designated as follows:
Stainless Steel and Related Alloys: 201; 254 SMO; 301; 301 AL;
301Si; 302; 303; 303 SE; 304; 304 L; 304 LV; 304 V; 3049;
305;30512; 308; 309; 309 S; 309 SCB; 310; 310 S; 316; 316 L; 316
LN; 316 Ti; 317; 317 L; 321; 330; 347; 384; 405; 409; 410; 410 S;
414;416; 416 SE; 420; 420 A; 420 HC; 420 LC; 420 MO; 430; 430Li;
434; 436; 439; 440 A; 440 C; 441; 442; 444; 446; 18 SR1;Carpenter
20,CB32; Carpenter 4552; Custom 450; 18-9LW1; 19-90L4; Greek
Ascology;; AL-6XN4; 904L; Duplex 2205; Duplex 2304; Duplex 2507
High Manganese Alloys: Nitronic 321; Nitronic 331; Nitronic 40
(21-6-9)1; Nitronic 501; Nitronic 601. Precipitation Hardening and
High Iron Alloys: A 2864; AM-3504; 17-4PH1; 17-7PH1; PH 15-7MO1.
Electronic Alloys: Ulbravar 29-17 (Alloy 2917); Ulbraseal 36 (Alloy
36); Ulbraseal 42 (Alloy 42) Ulbraseal 46 (Alloy 46); Ulbraseal 52.
Nickel, Nickel Based & Nickel-Iron-Chromium Alloys: 80Ni-20 Cr;
Ni 200; Ni 201; Ni 233; Ni 270; Hastelloy B35; Hastelloy B25;
Hastelloy C-45; Hastelloy C2765; Hastelloy C225; Hastelloy G-35;
Hastelloy G-305; Hastelloy X5; Haynes 2145; Haynes 2305; Haynes
2425; Haynes 2825; HR 1205; Waspaloy6; Nimonic 753; Monel 4003;
Monel 4013; Monel R4053; Monel K5003; Inconel 6003; Inconel 6013;
Inconel 6173;
Inconel 6253; Inconel 7023; Inconel 7183; Inconel 7223; Inconel
X-7503; Incoloy 8003; Incoloy 8013; Incoloy 8253; Ni-Span-C 9023
Cobalt Based Superalloys and Related Alloys: L-605 (Haynes 25)5;
Haynes 1885; N 155; ULMET
Superalloys:
Monel 400, Monel K-500/K500, Waspaloy, L605 (HS 25), Haynes 188,
Haynes 230, Haynes 263, HYMU 80/ HY MU 80
1) Monel 400
Monel is resistant to corrosion and acids, and some alloys can
withstand a fire in pure oxygen. It is commonly used in
applications with highly corrosive conditions. The good resistance
against corrosion by acids and oxygen makes monel a good material
for the chemical industry.
* Monel 400 Sheet, Plate Per QQ-N-281 CL A, AMS 4544, ASTM-B-127 *
Thickness: 0.018"~3.000", Width: 12"~60", Length: 36"~192"
* Monel 400 Tubing is offered in a variety of requested sizes.
2) Monel K-500 /K500
Small additions of aluminium and titanium form an alloy (K-500)
with the same corrosion resistance but with much greater strength
due to gamma prime formation on aging.
* Monel K-500/K500 Sheet, Plate Per QQ-N-286 * Thickness:
0.040"~1.000", Width: 36"~48", Length: 60"~180"
3) Waspaloy
* Waspaloy Sheet, Plate Per AMS 5544, Chem AMS 5706 5707 5708 5709
* Thickness: 0.012"~1.000", Width: 12"~48", Length: 36"~120"
4) L605 (HS 25)
Alloy L605 has excellent strength, good oxidation resistance, very
good sulfidation resistance, and relatively good resistance to wear
and galling. Used in gas turbine parts, bearings, and various
industrial applications.
UNS R30605/ Haynes 25
* L605 Sheet, Plate Per AMS 5537, B50T26, B50A460, Thickness:
0.010"~1.500" , Width: 36"~48", Length: 76"~120"
* L605 (HS 25) Vac Melt Bar Per AMS 5759, Diameter: 0.205"~6.5",
Length: 144" Random Length
5) Haynes 188
Haynes 188 Alloy is a Cobalt-Nickel-Chromium-Tungsten Alloy that
combines excellent high temperature strength with very good
resistance to oxidizing environments.
UNS R30188/ Alloy 188
* Haynes 188 Sheet, Plate Per AMS 5608, B50A712, B50TF59,
Thickness: 0.010"~2.000", Width: 36"~48", Length: 36"~144"
* Haynes 188 Bar Per AMS 5772, B50TF74, Diameter: 0.400"~7.000",
Length: 144" Random Length
6) Haynes 230
Haynes 230 has best balance of strength, thermal stability,
oxidation resistance, thermal cycling resistance and fabricability
of any major high-temperature alloy. Used in gas turbine combustors
and other key stationary components. Also used for heat treating
and industrial heating applications, and in the
chemical/petrochemical process industry and in fossil energy
plants.
UNS N06230/ Haynes 230 Alloy
* Haynes 230 Sheet, Plate Per AMS 5878, ASTM-B-435, B50TF246,
Thickness: 0.016"~1.500", Width: 36"~48", Length: 36"~144"
* Haynes 230 Bar Per AMS 5891, ASTM-B-572, EMS 55474, Diameter:
0.500"~4.500", Length: 144" Random Length
7) Haynes 263
* Haynes 263 Sheet, Plate Per AMS 5872, B50A771A, Thickness:
0.063"~0.385", Width: 36"~48", Length: 120"~144"
8) HYMU 80 / HY MU 80
* HYMU 80 / HY MU 80 Sheet, Plate Per Capable of Mil-N-14411 Comp
1, ASTM-A-753 Type 4, Thickness: 0.004"~1.500", Width: 12"~30",
Length: 60"~120"
* HYMU 80 / HY MU 80 Bar Per Capable of Mil-N-14411 Comp 1,
ASTM-A-753 Type 4, Diameter: 0.250"~2.500", Length: 144" Random
Length
9) <Cobalt Alloy>
L605 L-605Sheet, Plate: AMS 5537
L605 L-605 Bar, Alloy # 25, AISI 670: AMS 5759, AMS 5796
10) <Super / High Temperature Alloys>
Invar 36 HRAP Plate: ASTM B-753, MIL-S-16598A AMD 2, Kovar: AMS
7726, AMS 7727, AMS 7728, MIL-I-23011 C1-1
11) Hastelloy Alloys
Hastelloy is a superalloy known for its resistance to high
temperatures and stress in severely corrosive environments. Forged
primarily from nickel, some types of Hastelloy alloys are common in
nuclear reactors, chemical reactors and pipes & valves in
chemical installations. Hastelloy X is also used for components
such as combustion chambers, tail pipes in aircraft and land-based
gas turbine engines.
Nickel-based specialty metal Super Alloy Hastelloy X AMS 5536 is
the common Sheet and Plate specification.
UNS N06002/ Hastelloy/ Hastelloy X/ Alloy X
Hastelloy X, Hastelloy X-750: AMS 5754, AMS 5798, AMS 5536, AMS
5587
Hastelloy C 276: AMS 5530, AMS 5750, Hastelloy W, S, N: AMS 5755,
AMS 5711, AMS 5607
Waspaloy: AMS 5706, AMS 5707, AMS 5708, AMS 5709, AMS 5828, AMS
5706, AMS 5544
Maraging 300: AMS 6514, 4750: AMS 7718
Nickel alloy 200: ASTM-B-160, Nickel 400, Nickel 405, Nickel K-500:
AMS 4544, AMS 4574, AMS 4575, AMS 4576, AMS 4674, AMS 4675, AMS
4730, QQ-N-281 A, QQ-N-281 B
Rene 41: AMS 5545, AMS 5712, AMS 5713, AMS 5800
Haynes 188: AMS 5772, AMS 5801, AMS 5608, AMS 5807
N-155: AMS 5769, AMS 5794, AMS 5532, AMS 5585
Monel K500: QQ-N-286, Inconel 706: AMS 5701, AMS 5702, AMS 5703,
Inconel 722: AMS 5684
Inconel 909: AMS 5884, AMS 5892, AMS 5893, Inconel 925: NACE
MR-01-75 Round Bar
Nimonic 75: BS HR5, HR203, HR403, HR504, Nimonic 90: BS HR2, HR202,
HR501, HR502, Nimonic 263: AMS 5872, AMS 5882
MP35N: AMS 5758, AMS 5844, AMS 5845, Alloy 31: AMS 5545, 5712, N155
(Multimet): AMS 5532
Alloy 188: AMS 5608, AMS 5772 ,HY MU-80: AMS 7701, MIL-N-14411, MU
METAL-ANNEALED HALF HARD, 1/2H: AMS 7701, AMS 7702
M-36: AMS 7711, M-27: AMS 7712, M-4, M-5, M-6: AMS 7716
* Nitronic 60, also considered a Super Alloy, is designed to be the
best non-galling stainless steel.
General Q and A Questions
Q: Would you provide samples For free?
A: Yes. with on stock specification We provide samples For Free.
Freight charge collect
Q: What information should i provide to source for the right
products?
A: Material grade, width, thickness, coating and Purchase quantity,
Expected lead time, etc
Q: What are the shipping ports?
A: Under normal circumstances, we ship from Shanghai, Tianjin,
Qingdao, Ningbo ports, you
can choose other ports according to your needs.
Q: About product prices?
A: Prices vary from period to period due to cyclical changes in the
price of raw materials.
Q: How long does your delivery time take?
A: In general, our delivery time is within 5-45 days, and may be
delayed if the demand is extremely
large or special circumstances occur.
Q: Can I visit your location?
A: Of course, we welcome customers from all over the world to visit
our factory. However, some
of the plants are not open to the public.
Q: Does the product have quality inspection before loading?
A: Of course, all our products are strictly tested for quality
before packaging, and unqualified products will be destroyed. We
provide All Original Mill test certificate and support third party
inspection.
Q: How to pack the products?
A: The inner layer has a waterproof paper outer layer with iron
packaging and is fixed with a fumigation
wooden pallet. It can effectively protect products from corrosion
during ocean transportation.
Q: What is your working time?
A: In general, our online service time is Beijing time: 8:00-22:00,
after 22:00,
we will reply to your inquiry during the next working day.