Jianglang Technology Co. Ltd. |
Verified Suppliers
|
|
3 Inch Aodd Pump Assembly Douctile Iron PTFE Membrane
1. Because it is using air as power, the diaphragm pump does not
heat and produce sparks; suitable for use in flammable and
explosive environment.
2. Use PTFE diaphragm, can be used for chemical properties
relatively volatile liquid, corrosive medium.
3. Diaphragm Pump can pump particle liquid;
4. The liquid can be conveyed by diaphragm pump is wide, the
viscosity from low to high, from corrosive liquid to viscous liquid.
Max Working Pressure | 120 psi(0.84Mpa, 8.4bar) |
Max Flow Rate | 270 gpm ( 1022lpm ) |
Max Reciprocating Speed | 135 cpm |
Max Suction Height (Dry Sucking) | 5m |
Max Permitted Grain | 0.37 in ( 9.4mm) |
Max Air Consumption | 180scfm(90L/s) |
Air Inlet Size | 3/4 in.npt(f) |
Air Outlet Size | 1 in.npt(f) |
Fluid Inlet Size | 3 in. |
Fluid Outlet Size | 3 in. |
Net Weight | Ductile Iron 115kg |
Exterior dimension drawing
Display
Packing & Shipping:
DIAPHRAGM OPTIONS
PTFE
Santoprene
Buna-N
Hytrel
Neoprene
VERSATILITY
This air diaphragm pump handles viscous fluids, slurries, solid
laden fluids, no priming needed, no foaming of fluid pumped, no
stall damages, portable
INSTALLATION
Be sure the mounting can support the weight of the air diaphragm
pump, hoses, and accessories, as well as the stress during
operation progress.
During installation, make sure that the air diaphragm pump has been
fixed with bolts on the mounting feet.
In order to facilitate the operation and maintenance, the
maintenance space should be enough during installing the air
diaphragm pump.
While fastening the air diaphragm pump, rubber pad can be padded to
reduce the noise and vibration during operation.