Home Companies Shenzhen Super Fast Laser Technology Co., Ltd.

Engine Case Rust Cleaning Machine Portable Laser Rust Removal Tool 100W

Active Member

Contact Us

[China]

Address: 3rd Floor, Building 3, No. 128 Shangnan East Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China

Contact name:Ivan

Shenzhen Super Fast Laser Technology Co., Ltd.

Engine Case Rust Cleaning Machine Portable Laser Rust Removal Tool 100W

Country/Region	china
City & Province	shenzhen guangdong

Product Details

Engine Case Rust Cleaning Machine Portable Laser Rust Removal Tool 100W

Product parameters

Items	Parameters
Cleaning Power	100W
Current Consumption	Pout = Ponm / 5A
Max. Power	600W
Power Voltage	AC 110/220V
Cooling Method	Air Cooling
Laser Class	Level 4
Pulse Energy	1.5mJ
Fiber Optical Cable	5m(Customizable)
Laser Wavelength	1064nm
Scan Width	1-120mm
Preheat Time	10-30s
Working Condition	A flat place without vibration and impact
Working Temperature	0-60 ℃
Storage Temperature	-10~+60℃
Machine size	L647 x W 440 x H859mm
Net Weight	70Kgs

Cleaning system setting page

● Field lens selection

Focusing mirror parameter selection, optional display 160mm focal length, 254mm focal length, 330mm focal length

● Galvanometer speed

The mirror swing speed is adjustable. The X mirror is 50HZ at the fastest and 50/30 per gear. The Y mirror is 200HZ at the fastest and 200/30 per gear.

● Laser frequency

Laser pulse frequency, 1K-200K optional.

● Laser power

Laser output power can be adjusted from 1 to 100.

● Laser pulse width

Use it while using a adjustable pulse width laser machine

● Graphic length (laser pattern is square)

The length of the laser beam. The maximum length is 120MM, and the length can be adjusted freely within 0-120mm range.

● Graphic width (laser pattern is square)

The width is up to 4MM, and the width can be adjusted freely within 0-40mm range.

● Filling pitch

The distance between lasers while cleaning with a circular laser.

● Opening delay and closing delay

When the laser galvanometer speed is too fast and the graphic length is too long, the ideal effect can be achieved by setting the switching light delay.

● Outer circle radius (laser pattern is ring)

The max. outer radius of the graphic outer circle is 40 mm, and the radius can be adjusted during the circular size. When the graph is circular, the inner circle radius is set to 0.

● Inner circle radius (laser pattern is ring)

The figure is a ring, and the radius of the inner circle can be set up to 40MM (but not larger than the radius of the outer circle). In this range, the radius can be adjusted to change the ring size.

● Application

While parameters were set in the interface. If you enable this set of parameters, click Application.

● Save

After set the parameters in the interface, remember to click “Save” to save the parameters for the next direct use.

● Red light

When the button is pressed, the red button turns red and the red light comes out. Press again and the red button will return to gray and turn off the red light.

● Laser

Laser light button, press the button, the laser light comes out. If the red light is emitted at this time, the laser will be forced out. Press the laser button again to turn off the laser light and the button will return to gray.

● Group

Mode selection, you can save nine sets of data. Click on the number on the left side of the mode, you can select the set mode parameters freely, click on the application. Remember to save the data after the parameter wat set in each interface.

Base Material	Surface Condition	Effective focus depth(mm)	Standard cleaning efficiency (mm/min)	High-speed cleaning efficiency(mm/min)	Cleaning effect
Cast iron	Heavy rust (0.08mm thickness)	＞35	2000	3000	Clean surface, no damage to the base metal
Carbon steel	Moderate corrosion (0.05mm thickness)	＞40	2000	2500	Clean surface, no damage to the base metal
Stainless steel	Surface oil, slightly rust	＞50	2000	2800	Clean surface, no damage to the base metal
Mold steel gear	Moderate oil stain, attached iron filings	＞40	3000	3200	Clean surface, no damage to the base metal
Aluminum plate	Oxide/surface contamination	＞35	2500	3000	Clean surface, no damage to the base metal
No putty paint layer	White pigmented paint (0.1mm thickness)	＞20	1800	2000	Clean surface, no damage to the base metal