Home Companies Jiangsu Kunyuan Rubber & Plastic Technology Co.,Ltd

Nitrile Butadiene Rubber NBR70 O-Ring Oil Resistance Hydraulic Seal

Contact Us

[China]

Trade Verify

Address: Room 2303, Building 1, No. 218, Tianmu West Road (Kerry Night Inn), Jing'an District, Shanghai

Contact name:Zhu

Jiangsu Kunyuan Rubber & Plastic Technology Co.,Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Nitrile Butadiene Rubber NBR70 O-Ring Oil Resistance Hydraulic Seal

Country/Region	china
City & Province	shanghai shanghai
Categories	Seals

Product Details

Nitrile Butadiene Rubber (NBR70) O-Ring oil resistance hydraulic seal

Nitrile butadiene rubber or nitrile rubber is copolymerized by acrylonitrile and butadiene with acrylonitrile content ranging from 18% to 50%. Nbr is one of the most commonly used rubbers for oil seals and O-rings.

With the containing of acrylonitrile, the higher the acrylonitrile content, the better the resistance to petrochemical hydrocarbon fuel. However, the performance under low temperature will be poorer. The normal temperature range for product use is from -25 °C to 100 °C.
Used for fuel tanks, lubricant oil tanks, and to make rubber parts used in fluid media such as petroleum hydraulic oil, gasoline, water, silicone grease, silicone oil, diester lubricating oil, and glycol hydraulic oil. It is the most widely used and cost-effective rubber seal in the market.

Material	Nitrile Butadiene Rubber
Article No.	NBR70
Function	oil seals and O-rings.
Scope of application	Used for hydraulic system, such as fuel tanks, lubricant oil tanks, heavy machinery, press fittings
Thickness	2 (mm) and customed size
Inner diameter	4 ~ 60 (mm) and customed size
Outer diameter	7 ~ 75 (mm) and customed size
Operating temperature	-25 to 100 (℃)
working pressure	≤40 Mpa
Medium	fluid media such as petroleum hydraulic oil, gasoline, water, silicone grease, silicone oil, diester lubricating oil, and glycol hydraulic oil.
Shore A hardness	70±5
Advantages	- Good resistance to oil, water, solvent and high-pressure oil. - Low permanent compression set value, good abrasion resistance and elongation.
Disadvantages:	- Not suitable for use in polar solvents such as ketones, nitrohydrocarbons, MEK and chloroform. It has poor weather resistance and needs to be protected from damage of ozone and ultraviolet rays.