|
[China]
Trade Verify
Address: No. 1 Kangting Street, Huangdao New District, Qingdao, China
Contact name:Jake Chen
Qingdao Shun Cheong Rubber machinery Manufacturing Co., Ltd. |
|
Verified Suppliers
|
|
|
Application:
This rubber mixing equipment is mainly used for plasticating and mixing of rubber and plastication. warming and sheeting rubber compound,cracking and refining of reclaimed rubber.
Structural Features:
1.The rubber mixing equipment's roll is made of LTG-H alloy chilled
cast iron.
2. The rubber mixing equipment speed reducing machine adopts hard
tooth, its running noise is low and owns long life. This mixing
machine adopts a special design of refining seal structure so that
it can eliminate the leakage of lubricating oil.
3. Our Company specially designed the human-orientated machine,
such as block rubber board and turbine tapping rubber device of
open mixing machine can be used steam style; Open mixing machine
operating system is designed on the machine.
4. This rubber mixing mill can be equipped with hydraulic or
mechanical device which can automatically make the rubber material
be mixed over and over again, so the labor intensity and mixing
time can be reduced greatly.
5. The roll nip of the mixing equipment can be adjusted by using
manual or electrical mode.
6. To ensure the safety of staff and equipments, we install
convenient button for emergency.
7. All the mixing equipment we provide to you are checked through 8
hours non-stop full load operation, customers can use the machine
immediately after installation.
| Model | Roller(DxL)(mm) | Front Roller Linear Speed(m/min) | Friction Ratio | Motor Power (KW) | Overall Dimension (LxWxH)(mm) |
| XK-160 | φ160x320 | 8.95 | 1:1.37 | 5.5 | 1500x750x1500 |
| XK-230 | φ230x600 | 10.21 | 1:1.19 | 15 | 2800x1200x1120 |
| XK-250 | φ250x620 | 14.1 | 1:1.17 | 18.5 | 3400x1500x1650 |
| XK-300 | φ300x750 | 15.1 | 1:1.25 | 22 | 3500x1600x1700 |
| XK-360 | φ360x900 | 16.25 | 1:1.25 | 30 | 3780x1850x1750 |
| XK-400 | φ400x1000 | 18.65 | 1:1.27 | 37 | 4350x1850x1785 |
| XK-450 | φ450x1200 | 24.26 | 1:1.27 | 55 | 5200x2380x1840 |
| XK-560 | φ560xφ510x1530 | 27.72 | 1:1.2 | 90 | 5845x2284x1978 |
| XK-550B | φ550x1500 | 27.94 | 1:1.22 | 110 | 5870x2475x2045 |
| XK-610 | φ610x2000 | 28.42 | 1:1.17 | 160 | 7070x2290x1840 |
| XK-660 | φ660x2130 | 28.6 | 1:1.24 | 245 | 7465x3662x2080 |
| XK-710 | φ710x2200 | 30 | 1:1.09 | 280 | 7500x3500x1800 |
1,Our engineers can design target machines for customers and send
them the drawing to confirm. We are always on the side of saving
your cost.
2,In the process of production, we will take photos and send to
customers for their track the progress.
3,Documents such as packing list, commercial invoice, and bill of
lading etc. will be sent after the delivery.
4,We could supply free English foundation DWG, installation
drawing, user guide, maintenance manual and part drawing.
5,We supply overseas engineer service and help to train your
workers to operate the machine.
1. Delivery time of the rubber machines?
This is specially designed machine according to your specific
requirement.
From engineer designing to production completion, it needs about 25
to 35 days.
