|
[China]
Trade Verify
Address: Room 1002, Xinghua Building,Zhengzhou City, China
Contact name:Wu
Shanghai Songjiang Jingning Shock Absorber Co.,Ltd. |
|
Verified Suppliers
|
|
|
What is the features of our metal flexible hose?
1. Bend easily and easy to install.
2. It is able to bear corrosion resistance and heat resistance strongly, stainless steel materials can be used safely for years .
3. Outside is covered with stainless steel wire braided ,have high bearing capacity.
4. Applied to repeated motion region in high-temperature areas, good anti-fatigue performance.
5. Diameter and length,welded on the end of hose can be produced as customer's requirement.a variety of end fitting configurations such as threaded(both NPT and BSP);fixed and floating flanges(stainless steel and carbon steel);welding neck connection and quick fittings.
Inner Core: Corrugated Stainless Steel
Flexible metal hose stainless steel core strengths are available in 304, 321 and 316L stainless steel
Stainless steel tubing formed into corrugations parallel to one another
Helical / Convoluted option available upon request
Outer Core:Braided Stainless Steel Layers
Purchase corrugated core hose with no layers, single or double braided
Flexible metal hose outer braid layers made from 304 stainless steel
What is the condition of our metal flexible hose ?
Connection type | Flanged/threaded/quick coupling/welding |
Hose material | Ss304/ss316/ss321 |
Diameter | DN6-DN700 |
Pressure | 6bar-25bar |
Temperature | -196℃~+600℃ |
Length | According to your request |
Thickness | 5mm-20mm |
To properly design a metal hose assembly for a particular application, the following design parameters must be determinde:
1. Temperature-----You should provide us information as the temperature to which the assembly is exposed aproper fit.
2. Size-----The diameter of the connections in which the assembly will be installed is needed to provide.
3. Media-----This is improtant since you must be sure that the assembly's components are chemically compatible with the media going through the hose as well as the environment in which the hose is installed.
4. Pressure-----identify the internal pressure to which the assembly will be exposed. This information isimportant to determine if the assembly is strong enough for the application.
5. Indenify the necessary end fittings-----This is required since fittings for the assembly must be chosen toproperly fit the mating connection.
What is the parameter of our metal flexible hose?
| Technical parameter of metal braided hose | |||||||
Nominal diameter DN | Inner diameter (mm) | Outer diameter | Minimum bending radius | Working pressure | |||
| Bellows | Braid mesh | Static | Dynamic | Single braid mesh | Double braid mesh | ||
| 8 | 8.8 | 13.2 | 14.4 | 50 | 110 | 15 | 20 |
| 10 | 11.7 | 16.5 | 17.7 | 65 | 145 | 185 | 20 |
| 15 | 13.5 | 19.5 | 21.1 | 80 | 180 | 18 | 20 |
| 20 | 20.0 | 27 | 28.6 | 120 | 270 | 10 | 15 |
| 25 | 27.0 | 34.5 | 36.1 | 160 | 360 | 6.3 | 10 |
| 32 | 32.0 | 40 | 41.6 | 175 | 400 | 4.0 | 6.3 |
| 40 | 39.6 | 52 | 53.6 | 225 | 510 | 4.0 | 6.3 |
| 50 | 49.7 | 62 | 63.6 | 280 | 640 | 3.0 | 5.0 |
| 65 | 61.2 | 80.2 | 81.8 | 410 | 915 | 3.0 | 5.0 |
| 80 | 79.0 | 96.3 | 97.9 | 486 | 1030 | 3.0 | 5.0 |
| 100 | 101.2 | 119.6 | 121.2 | 610 | 1340 | 2.5 | 4.0 |
| 125 | 124.1 | 145.3 | 146.9 | 700 | 1540 | 2.5 | 4.0 |
| 150 | 149.4 | 180.8 | 182.4 | 810 | 1780 | 2.5 | 4.0 |
| 200 | 176.0 | 240 | 243.2 | 1000 | 2000 | 2.5 | 4.0 |
| 250 | 248.0 | 290 | 294 | 1250 | 2500 | 2.5 | 4.0 |
| 300 | 298.0 | 350 | 354 | 1500 | 3000 | 1.6 | 2.5 |
| 350 | 347.0 | 400 | 404.8 | 1750 | 3500 | 1.6 | 2.5 |
| 400 | 397.6 | 460 | 464.8 | 2000 | 4000 | 1.6 | 2.5 |
