|
[China]
Trade Verify
Address: Add.: No. 338 mingxi road, Huangdao district, Qingdao Postal code: 266400
Contact name:
Qingdao Beishun Environmental Protection Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
PLC Control 75L Rubber Dispersion Kneader Machine For Rubber Mixing
| Model | X(S)N-35x 30 | X(S)N-55x 30 | X(S)N-75 x30 | X(S)N-110 x30 | X(S)M-150 x30 | |
| Total Volume of Mixing Chamber | L | 75 | 125 | 180 | 250 | 325 |
| Working Volume of Mixing Chamber | L
| 35 | 55 | 75 | 110 | 150 |
| Driving Motor Power | KW | 55 | 75 | 110 | 185 | 220 |
| Tilting Motor Power | KW | 1.1 | 1.1 | 2.2 | 4 | 5.5 |
| Tilting Angle | 140 | 140 | 140 | 140 | 140 | |
| Rotating Speed of (Front /Rear) Rotor | r/min | 30/24.5 | 30/24.5 | 30/24.5 | 30/24.5 | 30/24.5 |
| Pressure of Compressed Air | MPa | 0.5~0.8 | 0.6~0.8 | 0.6~0.8 | 0.6~0.8 | 0.6~0.8 |
| Consumption of Compressed Air | m3/min
| ≥0.9 | ≥1.0 | ≥1.0 | ≥1.5 | ≥2.0 |
| Pressure of Cooling Water | MPa | 0.3~0.4 | 0.3~0.4 | 0.3~0.4 | 0.3~0.4 | 0.3~0.4 |
| Pressure of Heating Steam | MPa | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 |
| Overall Dimension | Mm | 3800x2100x3000 | 4400x2200x3100 | 4500x2500x3200 | 4800x3000x3700 | 5000x3300x3900 |
| Weight | Kg | 6500 | 7800 | 10500 | 14500 | 19500 |
Structure features:
1. All of inside wall , discharge door, ram are of drill hole
cooling, and rotor is of hollow spray cooling.
2. Contacting faces with stock such as mixing chambers inside wall,
discharge door, ram are received hardening treatment.
Rotor bearing is of rolling bearing.
3. Axial seal of rotor is adopted with hydraulic seal, and with
adjustable seal ratio.
4. Operating of the discharge door is driven by the double-rack
tilting hydraulic cylinder and with plate-inserted or crank
locking.
5. The transmission system may adopt a dual-output hardened-gear
speed reducer, and used with gear coupling (joint) or the cross
universal coupling drive, the transmission system is structured
with stationary state, low noise, high efficiency and long-service
life.
6. Pneumatic control system is controlled by PLC instruction . A bi-directional air cylinder make the ram up or down , in case thatoverload occurs in the mixing chamber ,the top ram can be raised automatically or manually if necessary , so as to protect motor from overload
7.Tilting mechanism consists of brake motor , cycloidal gear
reducer , TP type worm and worm gear etc . It is able to actuate
the mixing chamber to tilte by 140 around the front rotor
