|
[China]
Trade Verify
Address: NO.28 MINTA RD. LITAHUI SONGJIANG DIST. SHANGHAI,CN
Contact name:
Shanghai Rotorcomp Screw Compressor Co., Ltd |
|
Verified Suppliers
|
|
|
Our KY130 high pressure crawler drilling rig comes with powerful driving system and improved drill arm. The drilling performance is quite desirable.
Feature
1. New type drill arm
The specially designed jib lubbing mechanism and drill arm have
more reasonable structures and are easy to be adjusted. The
drilling range of the drill carriage is greatly expanded, while low
position horizontal holes can be drilled. A high power hydraulic
motor is adopted for the high pressure crawler drilling rig to
obtain great gradeability and tractive effort.
2. Safe and stable walking mechanism
The reliable automatic crawler belt leveling and great braking
system can not only make the vehicle walk stable, but also greatly
reduce the ground's impact to the vehicle. A unique chain fixing
device can enhance the walking reliability of the high pressure
crawler drilling rig to a great extent.
3. Powerful four-cylinder diesel engine
The engine's excellent towing power give the construction vehicle
great gradeability.
Specifications
| Model | KY130 High pressure crawler drilling rig |
| Rock hardness | F=6-20 |
| Hole diameter | Ф105-140mm |
| Economical drilling depth | 25m |
| Pressure | 0.7-1.4Mpa |
| Air consumption | ≥15m³/min |
| Rotating speed | 0-70r/min |
| Rotating torque | 2000N.m |
| Lifting capacity | 18000N |
| Propulsion type | Hydro-cylinder-chain |
| Propulsion length | 3000mm |
| Drill rod specification | Φ64×3000mm/Φ89×3000mm |
| Gradeability | 30° |
| Ground clearance | 320mm |
| Walking speed | 2km/h |
| Drill arm rising angles | Down 15°, Up 50°, Total 65° |
| Drill arm swing angle | Left 45°, Right 45°, Total 90° |
| Carriage swing angle | Left 50°, Right 50°, Total 100° |
| Carriage pitch angle | 180° |
| Carriage compensation | 1200mm |
| Diesel engine | QC 498(39kW 2400r/min) |
| Overall dimension (L×W×H) | 5600×2340×2550(mm) |
| Total weight | 5500kg |
| Note | Pneumatic-hydraulic driving mechanism |
Recommended spare parts for KY130
| Drill bit diameter | 115mm |
| Drill rod (Diameter×L) | Φ 76×3000mm |
| Drill hammer | HD45A |
