|
[China]
Trade Verify
Address: NO.28 MINTA RD. LITAHUI SONGJIANG DIST. SHANGHAI,CN
Contact name:
Shanghai Rotorcomp Screw Compressor Co., Ltd |
|
Verified Suppliers
|
|
|
Multi Stage Direct Driven Air Compressor Wear Resistant 9800m3/Hr Flow
Direct Driven Air Compressor Description:
Large displacement,stable pressure and high efficiency.
Low exhause temperature (only 7 °C~10°C higher than the ambient
temperature)
Safe,liable,smooth operation,little noise and long maintenance
cycle and using life.
The intelligent control system completely satisfy the continuous
cooperation without man work.
Many screw air compressors operate together and start or shut down
automatically
according to the air amount,and no man-work is needed.
It is more energy saving for a single compressor can adjust air
demand automatically according to the users' air amount(frequency
conversion type).
The degree of tightness of the belt can be auto-matched with the
flexible belt. Through adjusting the tensility, the loss of the
pressure and efficiency can be reduced to the lowest point and
increase the efficiency.
Direct Driven Air Compressor Feature
such as: 380Volt,3phase,50hz
420Volt,3phase,50hz
380Volt,3phase,60hz
220Volt,3phase and 60hz, etc.
45KW air cooling compressor parameters
| ITEM | UNIT | MODEL | ||||
| LGCD-45 | ||||||
| Free air delivery | m3/min | 7.70 | 7.60 | 7.00 | 5.80 | |
| Max. working pressure | MPa | 0.7 | 0.8 | 1.0 | 1.3 | |
| Compressor type | Oil inject screw compressor | |||||
| Cooling type | Air cooling | |||||
| Driven type | Direct driven | |||||
| Inlet status | Temperature | ℃ | ≤45 | |||
| Pressure | MPa | Atmospheric pressure | ||||
| Relative humidity | ≤90% | |||||
| Noise Level | dB(A) | ≤72 | ||||
| Residual oil content | ppm | ≤2 | ||||
| Drive rotor speed | rpm | 2970 | 2970 | 2970 | 2970 | |
| Compressed air outlet temperature | ℃ | Ambient temperature＋10 | ||||
| Cooling air flow | m3/hr | 9800 | ||||
| Control mode | Intelligent controller | |||||
| Safety valve set pressure | MPa | 0.77 | 0.88 | 1.10 | 1.43 | |
| Lubricating oil volume | L | 30 | ||||
| Lubricating oil brand | ROTORCOMP | |||||
| Compressed air outlet connection | G1-1/2 | |||||
| Dimension | L | mm | 1500 | |||
| W | mm | 1000 | ||||
| H | mm | 1320 | ||||
| Net Weight | kg | 780 | ||||
| Motor | Model | Y2200L1-2 | ||||
| Speed | rpm | 2950 | ||||
| Rated Power | KW | 45 | ||||
| Service factor | 1.2 | |||||
| Protection type | IP23/IP54 | |||||
| Insulation class | F | |||||
| Startup mode | ʏ-Δ starting | |||||
| Voltage | V | 380(Special on request) | ||||
| Frequency | Hz | 50(Special on request) | ||||
| Rated current | A | 84 | ||||
| Weight of motor | kg | 312 | ||||
45KW air compressor main spare parts
| No. | Item | Model | Brand | |||
| 45KW | ||||||
| 0 | Max. working pressure | 0.7 | 0.8 | 1.0 | 1.3 | |
| 1 | Air end | 4030200017 | 4030200017 | 4030200016 | 4030200015 | ROTORCOMP (China) |
| 2 | Motor | 4020100072 | HEBEI/HUADA | |||
| 3 | Pully | 402010008 | CPT | |||
| 4 | Coupling | 4051000021 | OPT (Germany) | |||
| 5 | Intake Valve | 4070103001 | HONGXING | |||
| 6 | Solenoid valve | 4080101002 | CKD | |||
| 7 | Minimum pressure valve | 4070202002 | HONGXING | |||
| 8 | Safety valve | 4070304001 | 4070304002 | 4070304003 | 4070304004 | YUANTIAN |
| 9 | Air filter | 4080102002 | ROTORCOMP | |||
| 10 | Air filter element | 4080102015 | ROTORCOMP | |||
| 11 | Oil filter | 4080204001 | ROTORCOMP | |||
| 12 | Oil separator element | 4080306015 | ROTORCOMP | |||
| 13 | Oil separator tank | 4041201001 | ROTORCOMP | |||
| 14 | Cooler | 4060500034 | ROTORCOMP | |||
| 15 | Cooling fan assembly | 4060100031 | ROTORCOMP | |||
| 16 | Oil level sight glass | 4120400031 | ROTORCOMP | |||
| 17 | Solenoid valve | 4072000031 | HONGXING | |||
| 18 | Controller | 4101300131 | PLOT | |||
| 19 | Contactor-1 | 4100900021 | SCHNEIDER (France) | |||
| 20 | Contactor-2 | 4100900081 | SCHNEIDER (France) | |||
| 21 | Contactor-3 | 4100900091 | SCHNEIDER (France) | |||
| 22 | Pressure sensor | 4100100011 | ROTORCOMP | |||
| 23 | Temperature sensor | 4100300031 | ROTORCOMP | |||
| 24 | Pressure gauge | 4100200011 | ROTORCOMP | |||
Screw Compressor Spare Parts
PLC(Siemens/Schneider)
• Significantly increase service life
• Powerful troubleshooting and protection function
Intake valve(HOERBIGER from Austria)
• System automatically adjusts the consumption
volume of gas accordingly
• System automatically adjusts the consumption
volume of gas accordingly
Motor (Jiangtian, Qingjiang,
same quality as Sullair of USA)
• Protection class IP54, insulation class F
• Efficiency 3%-5% higher than similar products
Air end (German technology) Rotorcomp
• Higher efficiency and more dependable
• Higher efficiency and more dependable
Air filter (Germany MANN)
• 99.9% dedusting effect, ensuring
dustproof quality of air compressor
Double screw (Sweden SKF)
• High precision, long service life
After-sale Service
• Any questions or requests before, during or after sales, we would like to help you any time and will find you the best solution in 24 hours.
• Warranty: One year for the whole machine Genuine spare parts will be provided with best price.
• Over board engineer service is available.
Special Customized Service
1) Full OEM
• Quantity: at least 5 pcs
• In this plan, we will do all the changes (Color, name plate and logo) as your need, and will not charge extra fee.
2) Half OEM
• Quantity: no limit
• Under this program, we can make the necessary alteration (name plate and logo) but we will charge some extra fee for the name plate, as the name plate factory has the MOQ.
3) Logo OEM
• Quantity: no limit
• Only the logo will be changed to yours, and no extra fee will be charged.
Overseas Engineer Service
• We are available to send our engineer for aboard service. Only need you to arrange the accommodation, transportation and translator. Extra cost for each will be discussed based on local price level.
Why Shanghai Rotorcomp compressor?
1. Stable and reliable
A Strong research and development capabilities, the effective use of a large number of patents.
Strong time has a strong R & D team, and close cooperation with Germany Rotorcomp Gmbh, has obtained 26 patents, the industry's leading design level, to create a reliable air compressor products.
B Selection of reliable parts
C exquisite manufacturing capability
Manufacturing benchmarking enterprises, improve the manufacturing management process, treat every manufacturing link with the spirit of craftsman, to create reliable air compressor products.
D rigorous testing methods and verification methods
Each test data of the first digital air compressor test line in China has been validated and verified to ensure the delivery quality of each device. We provide a corresponding test report for each of the products that have been manufactured in strict energy efficiency, and resolutely say no to the virtual standard parameters!
