JINPAT Electronics Co., Ltd |
Verified Suppliers
|
|
Medical Equipment Through Hole Slip Ring of 8 Circuits Transmitting 20A Current
The LPT080-0220-05S-01A through hole slip ring can be used in any electromechanical system that requires unrestrained, intermittent, or continuous rotation while transferring power or data.It provides an economical, readily available solution when a compact through-bore configuration is required.
It integrates transmission of current, signal and compressed air into one unit. With a flexible φ80mm through hole, it is easy to be installed with low rotating torque.
Specifications
Circuits | 2 circuits * 20A, 5 circuits *Device Net Signal, 1circuit *Compressed Air |
Working Voltage | 24VAC/220VAC |
Dielectric Strength | Between circuits1000V@50Hz(P) 500V@50Hz(S) |
Insulation | ≥500MΩ@500VDC (P) ≥300MΩ@300VDC (S) |
Electrical Noise | ≤70mΩ (50rpm) |
Working Speed | 0~100 rpm |
Through Hole | φ80mm |
Contact | Precious Metal |
Housing | Aluminum Alloy |
Wire Size | MULTI-STANDARD/SC2.1(2.5mm²) UNITRONIC@BUS DN THIN FD P1x2XAWG24+1x2XAWG22 |
Temperature | -20°C~+60°C |
Humidity | ≤60%RH |
IP | IP64 |
Pipe Diameter | 8mm |
Rotating Torque | ≤5 N.m |
Connecting Aperture | G1/B |
Company Show