|
[China]
Trade Verify
Address: Rm 1503, A Bldg, Southen International Plaza,Yitian Rd,Futian Dist,Shenzhen,518017,China.
Contact name:John
JINPAT Electronics Co., Ltd |
|
Verified Suppliers
|
|
|
8 Circuits* 2A Capsule Slip Ring with 240VAC Voltage 24-hour
Technology Support
LPC-12A-0802 can be used in any electromechanical system that requires
unrestrained, intermittent, or continuous rotation while
transferring power or data.
It provides an economical, readily available solution when a
compact through-bore configuration is required. Fiber brushes do not require lubrication and produce virtually no
wear debris, for maintenance-free, lifetime operation.
Specification
| Circuits | 8circuits *2A |
| Working Voltage | 240VAC |
| Dielectric Strength | Between circuits≥500VAC@50Hz |
| Insulation | 100MΩ@500VAC |
| Electrical Noise | ≤15mΩ (50 rpm) |
| Working Speed | 0~300 rpm |
| Contact | Gold to Gold |
| Housing | Aluminum Alloy |
| Wire Size | 0.15mm² two-core twisted shielded wire |
| Wire Length | Rotor:250±5mm Stator:250±5mm |
| Temperature | -20°C~+60°C |
| Humidity | ≤60%RH |
| IP | IP54 |
Outline Drawing
R&D Team
Company introduction
JINPAT Electronics, founded since 1996, is a leading manufacturer of slip rings, who has been committed to developing and manufacturing a large variety of industrial slip rings applied to many fields. Typical products like Capsule Slip Ring, Through-bore Slip Ring, Large-current Slip Ring, High Frequency Slip Ring, Fiber Optic Slip Ring, Separate Slip Ring, Pin Slip Ring are off-the shelf units. Besides of these, customization is supported to cater to different application in that electrical rotary joints can be designed exclusively for Ethernet, USB, HDMI, Sensor, CAN Bus, Thermocouple, RS232, RS422 and so forth. All the products have been secured by our quality management system, certificated by the GB/T19001-2008/ IS09001:2008.
