JINPAT Electronics Co., Ltd |
Verified Suppliers
|
|
20 Circuits 100mm ID Through Bore Slip Ring with Low Electrical Noise for Thermal Power Station
Description
The through bore can be used to mount the slip ring on a bracket or used for routing hydraulic pneumatic passages as it can integrate pneumatic hydraulic rotary joints of 16 channels at most. Also, it can integrate high-frequency rotary joints and fiber optic rotary joints to meet more technical challenges. Moreover, these slip rings are able to stand the EMC and Wet Calorific Tests.
Specification | |
Circuits | 20 circuits |
Operating Speed | 0-20rpm |
Working Temperature | -20℃~ +60℃ |
Working Humidity | ≤60%RH |
Electrical: | |
Current Range | 8circuits@5A, 12circuits@signal |
Voltage Rating | 240 /400V |
Dielectric Strength | ≥1000V@50Hz, ≥300V@50Hz(signal) |
Insulation Resistance | 500MΩ@ 500VDC,100MΩ@ 500VDC(signal) |
Electrical Noise | ≤10mΩ |
Mechanical: | |
Contact Material | Precious metal |
Housing Material | Aluminum alloy |
bore size | 100mm |
Protection | IP54 |
Product display