|
[China]
Trade Verify
Address: Rm 1503, A Bldg, Southen International Plaza,Yitian Rd,Futian Dist,Shenzhen,518017,China.
Contact name:John
JINPAT Electronics Co., Ltd |
|
Verified Suppliers
|
|
|
2 Circuits Separate Pancake Slip Ring Routing 5A Current with Modular PCB Design
Quick Detail
LPKS-0205 Slip Ring Through Bore 46.0mm can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure.
A slip ring is also called a rotary electrical interface, collector, swivel or a commutator. A slip ring can improve system performance by simplifying operations and eliminating damage-prone wires dangling from movable joints.
The 46.0mm unobstructed through-bore provides routing space for hydraulics, pneumatics or for a concentric shaft mount.
The LPKS-0205 Pan Cake Slip Ring uses advanced fiber brush technology which offers several advantages over conventional slip ring contacts including multiple points of contact per brush bundle, low contact force per fiber and low contact wear rates. In addition, fiber brushes do not require lubrication and produce virtually no wear debris.
| Specification | |
| Circuits | 2 circuits |
| Operating Speed | 100rpm |
| Working Temperature | -20℃~ +60℃ |
| Working Humidity | 60%RH or higher |
| Electrical: | |
| Voltage Rating | 380VAC/DC or higher |
| Current Rating | 5A per circuit |
| Dielectric Strength | ≥1000V@50Hz between each circuit |
| Insulation Resistance | 1000MΩ@ 500VDC |
| Electrical Noise | 1mΩ Min |
| Mechanical: | |
| Contact Material | Precious metal |
| Shaft Material | PCB |
| Shaft Diameter | Φ46mm |
| Lead Wire Size | Tinning AWG22 |
| Lead Wire Length | Standard 300mm (11.811inch) |
| Torque | ≤0.12 g·m (for reference ) |
Outline Drawing
Application Pictures
