Active Member
|
[China]
Address: East of Houjia Village South Road, Mingshui Street, Zhangqiu District, Jinan City, Shandong province, 250200 China.
Contact name:Tony Wong
Shandong Dacheng Machinery Technology Co., Ltd. |
|
|
Product Introduce
DICHENG DSR300 Powder And Granules Transportation Tri Lobe Roots Blower adopts the advanced technology of Japan,
| Type of technology | Positive displacement blowers |
| Design | Positive pressure |
| Air capacity | 85.9 to 134.7 m³/min |
| Discharge Pressure | 9.8 to 58.8Kpa |
| Medium | Air, Neutral gases |
| Conveying | Oil-free |
| Rotating Speed | 990 ~ 1480rpm |
| Discharge Diameter | 300mm(or customized) |
The main characteristic of our Powder And Granules Transportation Tri Lobe Roots Blower is small volume, light weight, flow strong, noise small, steadily reliable operation. This Water Treatment Three Lobe Roots Blower is mainly applied to such trades as water treatment, air transport, mine, vacuum packaging, aquaculture and etc. Our products export to Southeast Asia, Europe, North and South America and etc.
Product Feature
1. Air flow and pressure can be customized
2. Stable air flow and less pressure variation
3. Clean air not with oil moist
4. Bearing are all lubricated by oil moist
5. Long service life
Powder And Granules Transportation Tri Lobe Roots Blower Structure Diagram
| No. | Name | Material | Q' ty | No. | Name | Material | Q' ty |
| 1 | Shell | HT200 | 1 | 14 | Z sealing ring | Nitrile rubber | 1 |
| 2 | Impeller | HT200 | 2 | 15 | Gear | 35CrM | 2 |
| 3 | Drive shaft | 45Cr | 1 | 16 | Gear lock washer | Q235 | 2 |
| 4 | Driven shaft | 45Cr | 1 | 17 | Gear lock nut | SS400 | 2 |
| 5 | Drive side siding | HT200 | 1 | 18 | Gearbox | HT200 | 1 |
| 6 | Gear side siding | HT200 | 1 | 19 | Sleeve | 45 | 1 |
| 7 | Drive bearing | NSK | 2 | 20 | End cover | Q235 | 2 |
| 8 | Driven bearing | NSK | 2 | 21 | Pin | 45 | 1 |
| 9 | Sealing ring | Nitrile rubber | 2 | 22 | Plug | 35 | 1 |
| 10 | Sealing ring | Nitrile rubber | 2 | 23 | Oil gauge | 1 | |
| 11 | Bearing sleeve | 45 | 4 | 24 | Vent | 1 | |
| 12 | Bearing cover | HT200 | 1 | 25 | Grease nipple | C3605 | 2 |
| 13 | Bearing cover | HT200 | 1 | 26 | Gearbox seals | Barley paper | 2 |
Powder And Granules Transportation Tri Lobe Roots Blower Accessorie
Inlet filter silencer, Discharge silencer, Anchor bolts, Baseframe,
Safety valve, Check valve, Discharge pressure gauge, Flexible
connections, Lubricant oil.
Powder And Granules Transportation Tri Lobe Roots Blower Application
| Water Treatment | Aquaculture | Powder and granules transportation |
| Be used in water treatment plant for water purification and sediment mixing | Be used in a variety of fish pond for oxygen supply and mixing, and also for aquariums and live fish tank | Powder or granules (such as plastic materials, etc.) can be transported by pressure or vacuum |
| Incinerator | Ballast pump | Sandblast |
| Air combustion and exhaust emissions | Used for chemical liquid unloading and other ballast pumps | Used as air source for blast jet |
| Booster | Compost fermentation | Cereals Transportation |
| Used for high-pressure exhaust to make the gas into tiny molecules | High-pressure air take into the livestock manure tank to increase contact area of livestock manure and air , also apply to sewage treatment | Cereals such as wheat are transported from the rotary pilot valve with air |
| Pipe clearing | Sauna | Plating Bath |
| Used to remove dirt and iron dust during pipeline replacement or overhaul | Used for the sauna to provide air bubbles, mainly used for hospitals, hotels and etc. | Use air to stir the electrolyte to keep the electrolyte circulation, and disperse the attached blister to make plating quickly, spread evenly |
| Produce line drying | Car wash dry | Smoke exhaust |
| Quickly remove the water or oil on the cleaned items | Dry the car after washing | Exhaust smoke quickly to reduce pollution |
| Feed paper/cloth | Washing machine blow dry | Gas /heavy fuel injection |
| Collect plastic, cloth, paper and other scrap generated after trimming | Dried bottles after washing, suitable for food industry | Provide high pressure (2000 mmAq) and sufficient air volume |
Common malfunctions and Solution
| Malfunctions | Reason | Solution | ||
| Blower | Can not rotate | Can rotated by hand | The motor is damaged | Repair or replace the motor |
| Can rotated round by hand | The lobes are locked | Open to repair | ||
| The impurity in blower | Open to clean | |||
| Can rotate | Abnormal sound or vibration | Skid, v-belt is too tight or too loose | Adjust v-belt tension | |
| Pulley offset | Reset pulley | |||
| Pulley and belt cover friction | Adjust belt cover | |||
| Bearing oil lack or aging | To replace the oil | |||
| Gear oil lack or aging | To replace the oil | |||
| The safe valve leakage | Adjust the safe valve | |||
| Foundation insufficient strength | To strengthen the foundation strength | |||
| Piping resonance | Eliminate by the silencer and support | |||
| Exhaust pressure rises abruptly | See *annotated | |||
| Anchor bolt is too loose | Tighten | |||
| Rotor interference | Open to repair | |||
| The impurity in blower | Open to clean | |||
| Check valve bad | Replace | |||
| Overheating | Exhaust pressure rises abruptly | See *annotated | ||
| Temperature of working environment exceeds 40 ºC | Ventilated working environment | |||
| Inlet silencer obstruction | Cleaning/replace filter | |||
| Airflow insufficient | Pipeline leaks | Tighten the pipe connection | ||
| Inlet silencer obstruction | Cleaning/replace filter | |||
| The safe valve leakage | Adjust the safe valve | |||
| V-belt is too loose | Adjust v-belt tension | |||
| Exhaust pressure rises abruptly | See *annotated | |||
| Exhaust pressure rises abruptly | Shut off the valve | Fully open the valve | ||
| The water level rises | Adjust water level | |||
| Inlet/outlet pipe jams | Cleaning debris | |||
| Valve bad or twist reversed direction | Replace or reverse direction twist | |||
| Airflow overpowered | Reduce round speed or exhaust | |||
| Oil leak | Lubrication oil overmuch | Refuel to the center of oil standard | ||
Processing Workshop
Certificate
CE certificate, ISO9001 certificate and SGS certificate.
FAQ
1. What's the information should I provide when inquiry?
A: Air capacity
B: Pressure
C: Application
D: Use environment(Temperature, atmospheric pressure)
E: Do you need motor?
Or other specials you give us will be more appreciated.
2. What is your warranty?
Our warranty is 12 months after received the roots blower. During
the warranty period, replace the damaged parts for free of charge.
Out warranty period, to provide timely, high-quality technical
services and price concessions spare parts to ensure continuous
safe and high-quality equipment operation.
3. How long is the service life of Powder And Granules
Transportation Tri Lobe Roots Blower?
In normal use environment
D- Service life of gear is more than 60,000 hours.
4. What is your terms of packing?
A: Generally, we pack our small blowers in Immunized
Fumigation-Free Wood Case, the large blowers are packed on iron
pallet. If you have legally registered patent, we can pack the
goods in your branded boxes after getting your authorization
letters.
5. How does your factory control product quality?
We have quality inspection department. All blowers are running more
than 3 hour before delivery to test the quality. If there is
quality problem, we will produce new one.
Description of Performance parameters
The performance parameters table shows the model, outlet diameter,
rotate speed, discharge pressure, air capacity and power of motor.
2. The air capacity and pressure range of some blower models is repeated, to ensure the service life and low noise, should use the larger model.
| DSR300 Roots blower | |||||
Rotate Speed (r/min) | Pressure (kpa) | Air Capacity (m3/min) | Shaft Power (KW) | Motor | |
| Model | Power (KW) | ||||
| 990 | 14.7 | 88.7 | 30.7 | Y225S-4 | 37 |
| 19.6 | 88.3 | 39.6 | Y225M-4 | 45 | |
| 24.5 | 88.0 | 45.7 | Y250M-4 | 55 | |
| 29.4 | 87.7 | 54.9 | Y280S-4 | 75 | |
| 34.3 | 87.4 | 62.9 | |||
| 39.2 | 87.1 | 72.9 | Y280M-4 | 90 | |
| 44.1 | 86.9 | 78.3 | |||
| 49 | 86.5 | 86.3 | Y315S-4 | 110 | |
| 53.9 | 86.2 | 92.9 | |||
| 58.8 | 85.9 | 108.52 | Y315M-4 | 132 | |
| 1170 | 14.7 | 104.7 | 39.3 | Y225M-4 | 45 |
| 19.6 | 104.3 | 42.5 | Y250M-4 | 55 | |
| 24.5 | 103.9 | 54.3 | Y280S-4 | 75 | |
| 29.4 | 103.6 | 64.9 | |||
| 34.3 | 103.2 | 75.3 | Y280M-4 | 90 | |
| 39.2 | 102.9 | 80.2 | |||
| 44.1 | 102.5 | 89.4 | Y315S-4 | 110 | |
| 49 | 102.1 | 102.3 | Y315M-4 | 132 | |
| 53.9 | 101.9 | 112.3 | |||
| 58.8 | 101.6 | 123.5 | Y315L1-4 | 160 | |
| 1250 | 14.7 | 111.7 | 35.6 | Y225M-4 | 45 |
| 19.6 | 111.4 | 45.8 | Y250M-4 | 55 | |
| 24.5 | 111.1 | 53.6 | Y280S-4 | 75 | |
| 29.4 | 110.8 | 69.6 | Y280M-4 | 90 | |
| 34.3 | 110.5 | 79.3 | |||
| 39.2 | 110.1 | 92.6 | Y315S-4 | 110 | |
| 44.1 | 109.7 | 97.3 | |||
| 49 | 109.3 | 107.9 | Y315M-4 | ||
