Active Member
|
[China]
Address: Room B321, Building No.1, No. 619, Longchang Road, Yangpu District, Shanghai,China
Contact name:Jason
Shanghai Shenglin M&E Technology Co., Ltd. |
|
|
Blockchain Bitcoin TurnKey Solution Dry Cooler Immersion Cooling System
What's Immersion Cooling?
Also known as liquid submersion cooling. It is the practice of submerging computer components (or full servers) in a thermally, but not electrically, conductive liquid (dielectric coolant) allowing higher heat transfer performance than air and many other benefits.
Immersion cooling refers to the process of immersing servers, GPUs, ASICs, and other IT hardware in a non-conductive fluid. The fluid is a far more effective cooling medium than air is and so higher efficiencies are achievable. Two-phase immersion cooling is similar but the fluid boils on the hot components.
Why many large data centers have already moved or are considering the move to immersion cooling?
1. Save floor space. Compare with traditional forced air cooling way(using precision air conditioner), immersion cooling system will save much floor space. Because no need rack system and no need air conditioner indoor.
2. Save power. Compare with traditional forced air cooling way(using precision air conditioner), immersion cooling system will save much power. For example, no need to install many air conditioners indoor, then no compressor power consumption. For example, the bitcoin miners no need air cooling fans. Thesewill save power around 18~25%.
3. Increase hardware lifepan. In immersion, machines operate in a 100% controlled environment
with no dust, no temperature of humidity fluctuations, no
impurities. This will extend the service life of the mining machine
or server. This will also reduce machine maintainance fee.
4. Increase hashrate of the mining machine.
For immersion cooling system, our dry cooler is the most cost-effective way to remove heat and a necessary component of the immersion cooling system, We designed a full range of immersion optimized dry coolers. From 5kW single fan unit to the V-shaped 48-921kW dry coolers. Made in China, sized to your needs.
Features of dry cooler
| High efficiency heat exchanger: capacity designs for maximizing the heat transfer relative to the energy consumption of the fan. Tube and tube coupling design for low pressure drop in the coil on the media sides(maximum 100KPa at water designing condition). Our thermodynamic and aerodynamic designing software is long year tested and proved in Germany |
| Fan: only choose low specific energy consumption fans. Fan nozzle designs for maximum air flow and air throw.Our fans from the world`s leading manufacturer are practically proved to be reliable in operation and long lasting. Motor: protection class IP 54 and insulation class F. Air separator for each fan. |
| We facilitate you to have a long lasting and low maintainance operation. Durable material and rigid enclosure with hard gloss powder coated finish. Protective enclosure for both manifolds and U-bends. Unit design for outdoor installation. 100% leakage tested at 31bar. |
Options
| Coil design refrigerant: water, oil, glycol. | Multiple circuits. |
| Sub-cooling circuits. | Stainless steel or aluminum casing. |
| Coated aluminum or copper fins. | Explosion proof motor. |
| Customized fin spacing. |
Technical parameter
Dry cooler D1 series parameter (fin space 2.1mm)
| Type | D1-005- 1x350 | D1-006- 1x350 | D1-007- 1x350 | D1-009- 1x450 | D1-011- 1x450 | D1-013- 1x450 | D1-014- 1x500 | D1-017- 1x500 | D1-020- 1x500 | ||||||
| Capacity | Water | 35℃ outdoor temp. | Inlet | 45℃ | △ | KW | 4.89 | 5.9 | 6.83 | 9.39 | 10.99 | 13.33 | 14.32 | 17.01 | 19.8 |
| outlet | 40℃ | Y | |||||||||||||
| 20% Glycol | Inlet | 45℃ | △ | 4.72 | 5.69 | 6.69 | 8.9 | 10.61 | 13.05 | 13.91 | 16.11 | 19.29 | |||
| outlet | 40℃ | Y | |||||||||||||
| Medium | Water flow | M3/h | 0.85 | 1.03 | 1.2 | 1.63 | 1.91 | 2.3 | 2.5 | 3 | 3.5 | ||||
| Pressure drop | kPa | 36 | 31 | 58 | 25 | 40 | 80 | 50 | 60 | 40 | |||||
| Air flow | △ | M3/h | 2828 | 2712 | 2492 | 6199 | 5827 | 5225 | 8469 | 8168 | 7601 | ||||
| Y | |||||||||||||||
| Fan motor | Phase | 1 | 1 | 1 | 3 | 3 | 3 | 3 | 3 | 3 | |||||
| △ | W | 140 | 140 | 140 | 540 | 540 | 540 | 830 | 830 | 830 | |||||
| Y | |||||||||||||||
| △ | A | 0.6 | 0.6 | 0.6 | 1.1 | 1.1 | 1.1 | 1.45 | 1.45 | 1.45 | |||||
| Y | |||||||||||||||
| Fan | No X φ | 1x1x350 | 1x1x350 | 1x1x350 | 1x1x450 | 1x1x450 | 1x1x450 | 1x1x500 | 1x1x500 | 1x1x500 | |||||
| Sound pressure level | △ | dB(A) | 31 | 31 | 31 | 43 | 43 | 43 | 49 | 49 | 49 | ||||
| Y | 10m | ||||||||||||||
| Dimension | L | mm | 870 | 870 | 870 | 1020 | 1020 | 1020 | 1220 | 1220 | 1220 | ||||
| W | mm | 525 | 525 | 525 | 625 | 625 | 625 | 825 | 825 | 825 | |||||
| H | mm | 797 | 797 | 797 | 820 | 820 | 820 | 870 | 870 | 870 | |||||
| A | mm | 690 | 690 | 690 | 840 | 840 | 840 | 1040 | 1040 | 1040 | |||||
| B | mm | -- | -- | -- | -- | -- | -- | -- | -- | -- | |||||
| C | mm | -- | -- | -- | -- | -- | -- | -- | -- | -- | |||||
| D | mm | 490 | 490 | 490 | 490 | 490 | 490 | 490 | 490 | 490 | |||||
| Inlet φ | mm | 3/4” | 3/4” | 3/4” | 1” | 1” | 1” | 1-1/4” | 1-1/4” | 1-1/4” | |||||
| Inlet φ | mm | 3/4” | 3/4” | 3/4” | 1” | 1” | 1” | 1-1/4” | 1-1/4” | 1-1/4” | |||||
| Product weight(empty) | kg | 38 | 42 | 48 | 55 | 60 | 67 | 75 | 82 | 91 | |||||
Note: Standard SHSL-D1 dry cooler is vertical air discharge, for horizontal air discharge please add “H” in nomenclature, for excmple:SHSL-D1-005H-1X350
Reference:
| For solar industry | Country: China Application :cooling of solar heating system when it is overheated Cooling capacity: 463, 933 and 1475kW Cooling medium: 50% propylene glycol water Supply power: 380V/3P/50Hz Fan brand: Ziehl-Abegg Altitude:4200m | Country: UAE Application: solar thermal system Cooling capacity: 21kw Cooling medium: water Supply power: 230V/1P/50Hz Fan brand: Chinese brand | Country: Korea Application: solar system overheated Cooling capacity: 32kW Cooling medium: 30% ethylene glycol water Supply power: 230V/1P/60Hz Fan brand: Chinese brand |
 |  |  | |
| For plastic industry | Country: Algeria Application: cooling water from injection molding machine Cooling capacity: 694kW Cooling medium: water Supply power: 400V/3P/50Hz Fan brand: Ziehl-Abegg | Country: Armenia Application: for plastic caps of beverages factory Cooling capacity:70kW Cooling medium: 34% ethylene glycol Supply power: 380V/3P/50Hz Fan brand: Chinese brand | Country: Russia Application: bathtub factory Inlet/outlet air temperature:40℃/66℃ Inlet/outlet water temperature:85℃/50℃ Air volume:7986m3/h Cooling medium:water Supply power: 380V/3P/50Hz Fan brand: Chinese brand |
 |  |  | |
| Instead of cooling tower | Country: Argentina Application: for equipment cooling, to match chiller. Cooling capacity: 245kW Cooling medium: water Supply power:380V/3P/50Hz Fan brand: Chinese brand | Country: Peru Application: instead of cooling tower, to match chiller. Cooling capacity: 360kW Cooling medium: water Supply power:440V/3P/60Hz Fan brand: Chinese brand With wet curtain, with water pump and water tank | Country: Mauritius Application: supermarket and will match chiller use. Heat transfer capacity: 502kW Cooling medium: water Inlet air temp.: 32℃ Inlet medium temp.: 42℃ Outlet medium temp.: 37℃ Medium volume: 88m3/h Material: copper tube aluminum fin and galvanized steel frame, RAL9010 powder coating. Supply power: 380V/3P/50Hz Fan brand: Chinese brand, air volume: 20228m3/h |
 |  |  |
| For data center cooling | Country: Mongolia Application: match with precision air conditioner Cooling capacity: 17.6kW Cooling medium: 34% ethylene glycol Supply power: 400V/3P/50Hz Fan brand: Ziehl-Abegg | Country: Russia Application:data center cooling Cooling capacity: 763kW Cooling medium: water Supply power: 380V/3P/50Hz Fan brand: Ziehl-Abegg |
 |  | |
| Factory cooling | Country: Russia Application: ore yard cooling Cooling capacity: 493kW Cooling medium: 20% ethylene glycol Supply power: 400V/3P/50Hz Fan brand: Ziehl-Abegg | Country: China Application: plant cooling Cooling capacity: 52kW Cooling medium: 30% ethylene glycol Supply power: 380V/3P/50Hz Fan brand: Chinese brand |
 |  | |
| For power plant | Country: Hongkong Application: power plant Cooling capacity: 363kW Cooling medium: water Supply power: 415V/3P/50Hz Fan brand: Chinese brand | Country: Russia Application: power plant. Cooling capacity: 180kW Cooling medium: water Supply power: 380V/3P/50Hz Fan brand: Chinese brand |
 |  |
| Other application | Country: Singapore Application: match with fruit and vegerable freezer Cooling capacity: 14.6kw, 17kw and 29.37kw Cooling medium: 20% ethylene glycol Supply power: 230V/1P/50Hz Fan brand: Ziehl-Abegg | Country: Singapore Application: wastewater treatment factory, cooling water Cooling capacity: 429kW Cooling medium: water Supply power: 400V/3P/50Hz Fan brand: Ziehl-Abegg | Country: Russia Application: industrial cooling Cooling capacity: 153kW Cooling medium: 20% glycol Supply power: 380V/3P/50Hz Fan brand: Ziehl-Abegg |
 |  |  |
