Light Steel Coil Cut To Length Machine Punch & Recoiling Production Line 1.0x100mm

Light steel Coil Cut To Length & Punch & Recoiling production line 1.0x100mm, coil cut to length machine

Quick Detail:

1. Thickness : 0.4-1.0mm
2. Material : GI, PPGI, or Stainless steel, Aluminum
3. Line speed : 15meter/min
4. Material weight : 200kgs-1Mt normally
5. Coil inner diameter : 508mm
6. Cutting tolerance : ±1mm

Application:

Metal sheets or strips suppliers always need slitting and cut to length machine line for the production of metal sheets with different widths or lengths from GI, PPGI, or Stainless coils in large quantities.

GI, PPGI or Stainless coils are always brought to make wide metal sheets, like roll formed roofing or wall panels, while there are many occasions narrow steel strips are necessary, for example, the production of stud and tracks, roof battens or angle steel bars is always made from narrow steel strips.

The recoiling line with punch and recoiler is equiped with re-coiler, mechancial auto feed in and punch andrecoiler can get baby coils to make roof batten, ceiling, gutter, fascia panel machine.

Machine list:

1. 0.5Tons manual de-coiler rack
2. Servo feed in
3. Press punching device
4. Recoiler rack
5. Siemens PLC and IOP/ touch screen, Schneider brand inverter

Description/Technical Parameter details of complete line:

• 5TX1250mm Hydraulic Un-Coiler with coil car
• Simple pre-leveling device
• Slitting and Recoiler details as below table :

Profile Drawing/Layout/Equipment reference pictures: