0.4mm-0.6mm Galvanized Roof Fascia Roll Forming Machine PLC Control System, Full Automatic Fascia Rolling mills

0.4mm-0.6mm Galvanized Roof Fascia Roll Forming Machine PLC Control System, Full Automatic Fascia Rolling mills

Profile Drawing: 

Layout: 

Main Components

3TonX500mm Hydraulic Un-Coiler

Hydraulic system for expansion coil-inner-hole with 4 palms

      Link-connect expanding system

Pump power=1.5KW

      Load capacity=3 Ton; Coil Inner – diameter =451-530 mm

      Coil outer-diameter=Max. 1500 mm

      Coiler Width=Max. 500 mm

Feeding table

Feeding table with guide section

Roll Forming Machine

Feeding section with guide

Gear/Sprocket driving; 20 steps to form

                              Wall-plate-frame design, thickness of wall plate is 18mm

                              H 450 beam base frame

Rollers manufactured from 45#, CNC lathes, hard Chrome Coated

Shafts Diameter=ф75mm, Precision Machined

Main motor =5.5KW, Frequency speed control

Max. Line speed of roll former:Approx.15m/min

Fixed cover above the roll former included to avoid the hands go inside

Hydraulic Cutting Device

Stop to cut, Post cut, after cut-off, there is waste

Cutting tool material: Cr12, Heat treatment

Hydraulic Group, Pump motor =4KW

PLC Control System

Control the quantity & cutting length automatically

Combined with: PLC, Touch Screen (Siemens), Inverter (Shihlin),

Encoder (Omron), etc

Cut-to-length tolerance≤±2 mm

Control Voltage 24V