|
[China]
Trade Verify
Address: No.788-5C, Jimei Bei Da Dao, Jimei, Xiamen, China
Contact name:Lilly ZHENG
Xiamen New KaiHang Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
0.4-0.6mm Thickness Downpipe Roll Forming Machine With PLC Control System
Downpipe Roll Forming Machine is one type of interlock pipe making machine. A downspout is a pipe taht runs vertically along the side of the home,it is connected at the top to a hole in the gutter channel,the other end bends outward and usually sits several inches above the ground.This allows the water to flow away from the homes it exits the pipe
Downpipe Roll Forming Machine Quick Detail:
1. Thickness : 0.4-0.6mm
2. Material : Galvanized Sheets
3. Input width : 345mm
4. Material weight : 3MT
5. Coil inner diameter :470 mm
6. Driven way: by driven motor
7. Cutting way: no waste cut
8. Cutting tolerance : ±1mm
Downpipe Roll Forming Machine list:
1. 3T*600mm hydraulic un-coiler or manual un-coiler
2. Roll former
3. Hydraulic cutting device
4. Run out table
5. PLC control systems
Description/Technical Parameter details of complete line:
Hydraulic system for expansion coil-inner-hole with 4 palms
Link-connect expanding system
Pump power=1.5KW
Load capacity=3 Ton; Coil Inner – diameter =451-530 mm
Coil outer-diameter=Max. 1500 mm
Coiler Width=Max. 600 mm
| Suitable roll forming material | Color steel sheet |
| Thickness | 0.4mm-0.6mm |
| Coil input width | 345mm |
| Carriage Frame design | Wall-plate-frame-design |
| Roll forming stages | 16 stages |
| Material of forming roller | 45# steel, CNC lathes, Hard Chrome Coated |
| Shafts Diameter | Φ75mm |
| Main motor power | 5.5Kw with reducer |
| Rolling speed of roll former | 12-15m/min |
| Hydraulic group power | 3.0 Kw |
| Material of cutting blade | Cr12, hear treatment |
| Electric Voltage Standard | 380V/50Hz/3PH or as the customer's requirements |
| Major Color of Machine Painted | RAL 5015(Blue) or as per customer’s requirements |
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
Profile Drawing/Layout/Equipment reference pictures:
