11KW Motor Driven Siemens PLC Control Roll Forming Machine

Sliding door guide rail making machine, roll former, door frame machine for door frame system

Quick Detail:

1. Thickness : 0.8-1.2mm
2. Material : GI, 350Mpa
3. Input width : 128mm
   1. Material weight: 1.5MT cap.
   2. Driven way: by 11Kw driven motor
   3. Cutting way: stop to cut, there is waste after cut-off
   4. Cutting tolerance : ±1mm

Features:

A rolling shutter door track roll forming machine has been designed for producing steel guide rails for roller shutter doors to open up and close down.

Rolling shutter door track or guide rails are usually made out of galvanized steel or cold rolled steel strips with thickness 1.2-2mm and whenever there is a roller shutter door or a sliding door installed, there will be the door track or guide rails.

Machine list:

1. 1.5MT*300mm manual un-coiler
2. Roll forming machine
3. Cooling system for each stage
4. Hydraulic cutting device
5. Run out table
6. PLC control cabinet

Description/Technical Parameter details of complete line:

• 1.5TX300mm Manual Un-Coiler or Driven de-coiler

Un-powered; Load capacity= MAX.1.5Ton

Coil inner–diameter=410-570mm

Coil Width= MAX.300mm

• Roll forming machine with cutting details as below table :

• PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack 4 meter length rolled type

Profile Drawing/Layout/Equipment reference pictures: