PLC Control 1.5mm Window Frame Cold Roll Former With Punch

Cold Roll Forming Machine Window Frame Window Accessories Roll Forming Machine with punch

General instruction:

The product is as a window accessories, it is together with other tools as part of window

There is punching required and radius cutting after form

The  machine is controlled by PLC control cabinet, you can set the punch quantity and length and product length and batches for details.

The PLC control cabinet can be designed to fixed in machine for easy  transportation

Quick Detail:

1. Thickness : 1.5mm
2. Material : GI, 245Mpa
3. Input width : as per the drawings
   1. Material weight: 1.5MT cap.
   2. Driven way: by 3.0Kw driven motor
   3. Cutting way: stop to cut, there is waste after cut-off
   4. Cutting tolerance : ±1mm

Machine list:

1. 1.5MT*300mm manual un-coiler
2. Roll forming machine
3. Hydraulic post punching device
4. Hydraulic cutting device
5. Run out table
6. PLC control system

Description/Technical Parameter details of complete line:

• 1.5TX300mm Manual Un-Coiler

Un-powered; Load capacity= MAX.1.5Ton

Coil inner–diameter=410-570mm

Coil Width= MAX.300mm

• Roll forming machine with cutting details as below table :

• PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack 4 meter length rolled type

Profile Drawing/Layout/Equipment reference pictures: