T8 roll forming machine for wall/roofing panel, 1220mm input, low rib, wall panel roll forming machine

T8 roll forming machine for wall/roofing panel, 1220mm input, low rib, wall panel roll forming machine

General Introduction of the roofing machine:

A trapezoidal sheet roll forming machine is a regular metal sheet roll former that produces metal roofing sheets or roof panels for both individual and industrial building.

The height of the profile is 8mm, the pitch is 115mm and the effective width is 1150mm, it is widely used in Russia/Vietnam and Myanmar for low roofing building

Quick Detail:

1. Thickness : 0.4mm-0.8mm
2. Material : PPGI, soft-full hard yield strength
3. Input width : 1220mm
4. Effective width: 1150mm
5. Material weight : can design the un-coiler capacity as per request, normally 5Mt coil weight
6. Coil inner diameter : 510mm
7. Cutting tolerance : ±1mm

Machine list:

1. Hydraulic de-coiler
2. Roll former with 15mpm
3. Hydraulic cutter
4. Run out table or automatic stacking device
5. Siemens PLC and IOP/ touch screen, Schneider brand inverter

Description/Technical Parameter details of complete line:

• 5TX1250mm Hydraulic Un-Coiler with/without coil car

The un-coiler capacity normally is 5MT, but we can provide as per the user’s request such as 6MT, 7MT, 8MT, 10MT

The driven motor also can be designed suitable with the roll forming speed 15mpm

• Entry Roller & Manual Pre-shearing device (Un-powered)

To cut off the end of the final piece of sheet only

Working thickness: max. 0.8mm

• Roll forming machine with cutting details as below table :

• PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack Un-powered, 3 units

Packing standard:

Nude cargoes for roll former, polythene wooden box for PLC control cabinet

Profile Drawing/Layout/Equipment reference pictures: