|
[China]
Trade Verify
Address: No.788-5C, Jimei Bei Da Dao, Jimei, Xiamen, China
Contact name:Lilly ZHENG
Xiamen New KaiHang Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
Metal floor decking roll forming machine, 76mm height rib, composite metal deck panel
Quick Detail:
Application:
Steel roof deck: The steel roof decks are manufactured generally
for the construction of pitched, flat, or curved roofing almost on
all kinds of buildings;
Composite metal deck: The composite metal decks have embossments in
the vertical ribs designed to interlock with concrete slabs,
creating a reinforced concrete slab to develop a composite floor
system.
Metal form deck: Metal form decks are produced and used extensively
also in floor construction as a permanent steel base for poured
reinforced concrete floor slabs.
Architectural deck: This kind of steel deck offers architects and
engineers the ability to create amazing designing for striking and
spacious interiors, as well as dramatic and high-performing
exteriors.
Bridge deck: Where a bridge has main beams installed at suitable
centers, steel decking may be placed across the beams without
additional supports, suitable for new construction and bridge
rehabilitation.
Description/Technical Parameter details of complete line:
Expansion system by hydraulic group, Pump motor: 3KW
Driven motor to run the coil, Motor: 3KW
Inverter brand: TAIWAN Delta brand
Coil Inner-diameter=510+/-30mm
Coil width = Max.1250mm
Taper wedge expand type
Load capacity = Max. 5Tons
Snubber arms on top by pneumatic or hydraulic as per order
The coil car included or exclude as per order
| Suitable roll forming material | GI/Alu-Zinc sheets |
| Thickness | 0.8mm-1.2mm/1.5mm |
| Coil input width | 1220mm |
| Carriage Frame design | Wall-plate-frame-design Wall plate thickness 18mm |
| Roll forming stations | 28 stages |
| Material of forming roller | 45# steel, CNC lathes, Hard Chrome Coated |
| Shafts Diameter | Φ95mm |
| Main motor power | 15Kw×2 with reducer or higher |
| Roll forming speed | 12-15 m/min as standard design |
| Hydraulic group power | 5.5 Kw or 7.5Kw |
| Material of cutting blade | Cr12, hear treatment |
| Cutting design | After cut-off, there is waste |
| Electric Voltage Standard | 415V/50Hz/3PH or as per request |
| Major Color of Machine Painted | RAL 5015(Blue) or as requirements |
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
Schneider brand low voltage electric elements
Profile Drawing/Layout/Equipment reference pictures:
