TD1015 Roofing Sheet Crimping Machine High Precision Corrugated Iron Curving Machine

TD1015 hydraulic crimping curved machine, Siemens servo motor driving, high precision

Brief Introduction of Hydraulic Crimping Curved Machine:

Hydraulic curving machine produces curved roof panels by pressing the roll formed roof sheets continuously as per requested angles or radius on the sheet with fixed length and after the pressing, crimped roof sheets or crimp curved roofing is made. There is a PLC control system for the hydraulic curving machine and through the HMI on PLC electric cabinet, customers can set the crimp quantities and crimp distance to reach the curved angles or radius. The thickness of roof panels has to be less than 1.0mm; the pressing dies will be designed exactly the same as the roof sheets.

Quick Detail:

1. Thickness : 0.4-0.6mm
2. Material : G550, PPGI
3. Input width : 1220mm
4. Effective width: 1000mm

Machine list:

1. Feeding table with rubber rollers
2. Servo motor feed in
3. Quick change pressing dies with cassette design
4. Horizontal or vertical direction operation design
5. PLC control systems

Description/Technical Parameter details of complete line:

• details as below table :

Profile Drawing/Layout/Equipment reference pictures: