Octagon Pipe Shutter Door Roll Forming Machine With PLC Computer Control System

Octagon pipe shutter door roll forming machine

Features:

An octagon pipe roll forming machine is equipment that manufactures the octagonal axes of roundel for rolling shutter doors that is assembled by steel slats or metal sheet panels.

As an auxiliary equipment to rolling shutter door roll forming machines, the octagon pipe roll forming machine is not required as often as a slat or panel roll forming machine is, but it’s a necessary roll forming machine because all rolling shutter doors have to be pushed up or pulled down along the roundel, and the axe (octagon/octagonal pipe) is the core component on a roundel.

The raw materials for octagon pipe usually are galvanized steel or cold rolled steel of thickness 0.4-0.8mm and the widths depend on the required octagonal pipes or tubes that is used as the axes of rolling shutter roundels.

An octagon pipe roll forming machine usually consists of a manual decoiler, a pressing unit for holes, a roll forming unit, a cutting unit, control unit, and transmission unit. It can be running both automatically and manually under the PLC computer control system.

Quick Detail:

1. Thickness : 1.2mm
2. Material : GI, 350Mpa
3. Input width : 443mm
   1. Material weight: 3MT or 5MT
   2. Driven way: by 11Kw driven motor
   3. Cutting way: stop to cut, saw cut
   4. Cutting tolerance : ±1mm

Machine list:

1. 3MT*600mm hydraulic un-coiler
2. Roll forming machine
3. Hydraulic cutting device
4. Run out table
5. PLC control system

Description/Technical Parameter details of complete line:

• 3TX600mm Hydraulic de-coiler

Un-powered; Load capacity= MAX.1.5Ton

Hydraulic system for expansion coil-inner-hole with 4 palms

Pump power=1.5KW

Link-connect expanding system

Coil Inner – diameter =510 30mm

Coil outer-diameter=Max.1500 mm

Coiler Width=Max. 600 mm

Drag off turning type

Load capacity=3Ton

• Roll forming machine with cutting details as below table :

• PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack 4 meter length rolled type

Profile Drawing/Layout/Equipment reference pictures: