Unistrut Channel Roll Forming Machine , U Shape Shelf Panel Roll Forming Machine

Uni strut channel roll forming machine, U shape shelf panel with presser for high production

Quick Detail:

1. Thickness : 1.0-2.0mm
2. Material : GI/G350
3. Driven way: by driven motor
4. Cutting way: by hydraulic power pack
5. Cutting tolerance : ±1mm

Application:

Briefly, a Uni Strut Channel roll forming machine produces the steel channels, which usually supports wiring, plumbing, or mechanical components, such as air conditioning and ventilation systems.

“Strut channel is a standardized formed structural system used in the construction and electrical industries for light structural support”. Strut is usually formed from metal sheet, folded over into an open channel shape with inwards-curving lips to provide additional stiffness and as a location to mount interconnecting components. Increasingly, strut is being constructed from fiberglass, a highly corrosion-resistant material that’s known for its lightweight strength and rigidity. Strut usually has holes of some sort in the base, to facilitate interconnection or fastening strut to underlying building structures.

Machine list:

1. Un-coiler with pre-leveling(2 in 1)
2. Professional lubrication device
3. Auto servo feed in device
4. Presser
5. Punching tools
6. Roll former
7. hydraulic cutting device
8. no power Rack
9. PLC control systems

Description/Technical Parameter details of complete line:

• 2 Tons Hydraulic Un-coiler with pre-leveling device

Hydraulic system to expand coil inner hole, four palms

Motorized driving coil rotation, auto stop/start control, 2.2KW

Load capacity=2Ton

Coil width: 200mm

Coil Inner-diameter: Φ510±30mm

• Professional Lubrication device

Equipped between the roller feeder and the press

Lubrication for punching tools and the roll former

• Auto Feed in Device

Strip width: Max. 200, thickness: 1.5-2.0mm

Servo motor: YASKAWA, 1.3KW

• Presser

Capacity: 80 tons

Chinese Brand: YANGLI

• Roll Forming machine

Wall plate frame design, thickness of wall plate is 18mm

18 stages to form

Rollers manufactured from Cr12, heat treatment

Shafts Diameter=ф75mm

Main motor =11KW

• Hydraulic cutting device

Stop to cut

After cut off, there are 8mm material waste

• PLC Control System

Siemens brand PLC and touch screen, Schneider brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Run-out Rack

3 meters Length

No power

Profile Drawing/Layout/Equipment reference pictures: