Continuous Sandwich Panel Production Line Roof Panel Roll Former Work With PU Line

Roofing panel roll former for continuous sandwich panel machine,sandwich panel making machine

Brief Introduction:

A sandwich panel production line is always required for the production of metal skinned, Eps/xps board or Rockwool and Glass mineral wool insulated roofing and wall panels of prefab buildings, like assembled container houses.

People like to use metal roofing and wall panels made of pre-painted steel coils or galvanized steel coils instead of stones, bricks or clay tiles for most of residential, commercial, industrial and agricultural steel buildings, however a single metal roofing or wall panel is not a thermal sheet which can prevent a building or a house getting too hot in summer or too cold in winter.

So the roll former is still main part of different PU line

Quick Detail:

1. Thickness : 0.4mm-0.8mm
2. Material : Pre-painted Coil, 245Mpa, 345Mpa, 550Mpa
3. Input width : as per request
4. Effective width: as per request
5. Driven way: by driven motor
6. Cutting way: NO

Description/Technical Parameter details of complete line:

• Roll forming machine without cutting details as below table :

Packing standard:

Nude cargoes for roll former, polythene wooden box for PLC control cabinet

Profile Drawing/Layout/Equipment reference pictures: