Durable Metal Roof Ridge Cap Roll Forming Machine / Bottle Cap Making Machine

South Africa type ridge cap roll forming machine, bottle cap making machine

Application:

So many machine suppliers have designed and built roof ridge cap roll forming machine for making ridge caps or valley flashings installed along the ridge line of a sloped roof or in valleys.

During the installation of metal roof panels, there are always roof flashing required. Those flashing installed along the ridge line to protrude from the roof of a building to deflect water away from seams or joints are called roof ridge cap.

Quick Detail:

1. Thickness : 0.4-0.6mm
2. Material : Galvanized Sheets, G550
3. Input width : 375m
4. Material weight : 3MT
5. Coil inner diameter :470 mm
6. Driven way: by driven motor
7. Cutting way: no waste cut
8. Cutting tolerance : ±1mm

Machine list:

1. 3T*600mm hydraulic un-coiler or manual un-coiler
2. Roll former
3. Hydraulic cutting device
4. Run out table
5. Siemens PLC and IOP/ touch screen, Schneider brand inverter

Description/Technical Parameter details of complete line:

• 3TX600mm Hydraulic Un-Coiler

Hydraulic system for expansion coil-inner-hole with 4 palms

Link-connect expanding system

Pump power=1.5KW

Load capacity=3 Ton; Coil Inner – diameter =451-530 mm

Coil outer-diameter=Max. 1500 mm

Coiler Width=Max. 600 mm

• Roll forming machine with cutting details as below table :

• PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack Un-powered, 4 meter long

Profile Drawing/Layout/Equipment reference pictures: