|
[China]
Trade Verify
Address: No.788-5C, Jimei Bei Da Dao, Jimei, Xiamen, China
Contact name:Lilly ZHENG
Xiamen New KaiHang Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
High speed metal sheet roll forming machine with cooling systems, 121mm coil width
Quick Detail:
Machine list:
General instruction:
The steel battens work most of time as roofing and ceiling. Steel foof and ceiling battens are light yet strong, offering an economical alternative to timber battens. Manufactured from hi-tensile zinc/al steel, the battens are capable to remain straight and consistent throughout their long life. The HAT shaped profile of the batten allows for nesting, making them easier to store, carry and handle.
There are so many metal or steel batten systems available for domestic internal use and even available for cyclonic and high wind regions.
The common reasons for applying steel roof and battens are as following:
Helps to prevent plaster board from cracking, which can happen when directly fixing the lining boards to timber.
It’s easy to obtain a flat level ceiling even if the timber is uneven.
Fixing of ceiling batten along with some clips will reduced impact of noise between the top and bottom floor in a residential house.
Timber shrinkage is less likely to affect steel battened linings.
Less chance for call-back maintenance saves time and money.
Description/Technical Parameter details of complete line:
Un-powered; Load capacity= MAX.1.5Ton
Coil inner–diameter=410-570mm
Coil Width= MAX.300mm
| Suitable roll forming material | galvanized steel sheet |
| Thickness | 0.4mm-0.6mm |
| Coil input width | 121mm |
| Carriage Frame design | Wall-plate-frame-design |
| Rolling mills forming stages | 14 stages |
| Material of forming roller | 45# steel, CNC lathes, Hard Chrome Coated |
| Shafts Diameter | Φ65mm |
| Main motor power | 4Kw with reducer |
| Line speed of roll former | 15mtr per min |
| Hydraulic group power | 3.0 Kw |
| Material of cutting blade | Cr12, hear treatment |
| Electric Voltage Standard | 415V/50Hz/3PH or requirements |
| Major Color of Machine Painted | RAL 5015(Blue) or customized |
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
Profile Drawing/Layout/Equipment reference pictures:
