Active Member
|
[China]
Address: Mold city, development zone,Huanghua city,061000, Hebei Province, China
Contact name:Sales manager
Hebei Huayang Welding Mesh Machine Co., Ltd. |
|
|
1. Product description
Automatic electric galvanized mesh panel welding machine is used
for making wire mesh. The system used large capacity storage
device,and the weight of cross wire can reach 1 ton.Cross wire
feeding automatically, accurate position. Line wire feeding system
consists of straightening wheels and pressure rollers. The
straightening wheel can make the wire mesh flat,the mesh hole
precise and the diagonal error small. The function of the pressure
roll is to make the whole wire mesh flat without distortion.
2. Technical parameter
| Model | HY-DHW-1500 | HY-DHW-2000 | HY-DHW-2500 | HY-DHW-2800 | HY-DHW-3300 |
| Weld width(mm) | 1500 | 2000 | 2500 | 2800 | 3300 |
| Meshi trip(mm) | Single trip 3000 and no limit on return | ||||
| Std trans.spacing | >=25mm-stepless adjustable | ||||
| Std long.spacing | >=50mm, and progressive increase by 50 | >=100mm, and increase by 100 | |||
| Std weld spots | 31 | 41 | 51 | 27 | 32 |
| Wire diameter(mm) | 3.0-6.0 | 3.0-6.0 | 3.0-6.0 | 5.0-12.0 | 5.0-12.0 |
| Weld speed(times/min | 50-70 | 40-60 | 40-60 | 40-60 | 40-60 |
| Trans material | Straight bar/rod | Straight bar | |||
| Long material | Straight bar/rod | ||||
| Control mode | PLC programming servo motor stepper | ||||
| Mesh diagonal error | <=2 | ||||
| Mesh overall error | <=2 | ||||
| Air pressure | >=0.7 | ||||
| Weld material | Cold drawn wire, galvanized wire, cold rolled ribbed steel | ||||
3. Application area
The Automatic electric galvanized mesh panel welding
machine extensively used for 1.5-3mm diameter wire mesh,
used for light walls, titanium plate, small cages wire mesh.
4. Advantages
a. Using the lower-part electrode and wire putting device
connected as a whole structure, the adjustment of the vertical line
spacing of the mesh more convenient.
b. Transverse reinforcement raw material storage frame with
funnel method, you can store a lot of raw materials.
c. The greatest advantage is possible to adjust the distance
of line wires at random on the same mesh panel.
d. Welding part can easily switch, which greatly improves the
service life of machinery, maximum reduce the cost.
e. Electrodes with cooling water, good for wire 3-8mm.
