|
[China]
Trade Verify
Address: Botou City, Beijing-Shanghai Expressway exit, Zhenggang Road (500 meters south of Botou Development Zone)
Contact name:Harry Yang
Botou Golden Integrity Roll Forming Machine Co., Ltd |
|
Verified Suppliers
|
|
|
Fully automatic omega c u stud and track machine line with high speed
1. Description Of Stud And Track Machine
Our stud and track machine with high efficiency, none stop cut, non-deforming, simpl installation, dry construction, light weight and environment. Our factory mainly produce steel profiles for suspended ceiling and partition, we can customize the light keel steel macine for you.
If you have requirements for production speed, power, voltage and brand, please explain in advance.
2. Technical Details Of Metal Stud And Track Machine
| Machine Specifications | |
| Weight | About 3.2tons |
| Size | About 5.2M x 0.8Mx1.2M(length x width x height) |
| Color | Main color: Red or as your requirements |
| Warning color: yellow | |
| Suitable Raw Material | |
| Material | GI GL Aluminum |
| Thickness | 0.5-1.2mm |
| Yield Strength | 235Mpa |
| Main Technical Parameters | |
| Quantity of forming rollers stations | 14 |
| Diameter of forming rollers shafts | 50mm |
| Roll Forming Speed | 40m/min |
| Forming rollers material | 45# steel, coated with chromed treatment |
| Cutter material | Cr12MOV, with quenched treatment |
| Controlling system | PLC |
| Electric Power requirement | Main motor power: 5.5kw |
| Hydraulic unit motor power: 4kw | |
| Electric voltage | According to customer’s requirement |
3. Main Components Of Metal Stud And Track Roll Forming Machine
| Manual Decoiler | 1 Set |
| Feeding Table | 1 Set |
| Roll Forming Unit | 1 Set |
| Post Cutting Unit | 1 Set |
| Hydraulic Station | 1 Set |
| PLC Control System | 1 Set |
| Reveiving Table | 1 Set |
4. Production Flows Of Metal Stud And Track Roll Forming Machine
Uncoiling the sheet---Infeed guiding--Roll forming---Rectifying the straightness---Measure length---Cutting the panel--panels to the supporter (option: automatic stacker)
5. Advantages Of Our Metal Stud And Track Roll Forming Machine
· More than 10 engineers and More than 10 designers with more than 10 years experience
· We have completed production system. And more than 20 sets of CNC machines which can support lots of machine.
· Our machine's warranty period is 12 months and and we supply the technical support for the whole life of the equipment.
· Our machine adopts Taiwan Delta brand PLC control and touch screen, more durable and low failure rate.
· We more carefully to deal with the details. our rollers and shafts, we process 3 times.
6. Application Of The Metal Stud And Track Machine
This machine is widely used in the production of the metal roof sheets and wall panel. our machines are exported to many countries: Rwanda, Thailand, Philippines, Dubai, USA, South Africa, Peru, Russia, Saudi Arabia, Malaysia, Indonesia, etc.
7. Product photos Our Metal Stud And Track Machine
