Active Member
|
Address: JINGUI ROAD 18,YANGSHAN INDUSTRIAL PARK,WUXI CITY, CHINA
Contact name:WANG
FRIENDSHIP MACHINERY CO,LTD |
|
|
Name | Item | Specification |
Coil requested | Material | Color steel, |
thickness | 0.4-0.8mm | |
Tensile strength | 235Mpa | |
Coil width | Up:1297mm Down:1300mm | |
Decoiler(1 unit) | Type and weight capacity | Manual decoiler, 5T |
Inner diameter | 498-508mm | |
Outer diameter | Max:1800mm | |
Rollforming machine | Rolling speed | 15m/min |
Motor | 15KW, 3phase, 60Hz, 380V | |
Rolling step | 16 | |
Driving system | Chain transmission | |
Structure of machine body | Entire wall steel structure | |
Material of roller | 45# steel, chromed | |
Diameter of shaft | 75mm | |
Dimession | Abt.9m*1.5m*1.1m | |
Weight | Abt.10T | |
Electric control cabinet(1 unit) | Main component | PLC, frequency convertor, |
Cutting and length measurement | Automatic | |
Brand | Panasonic from Japan, | |
Hydraulic station (1 unit) | Power and strength | 3.5KW, 16Mpa |
Cutting machine(1 unit) | Material of blade | GCr12 mov steel, heatment |
Cutting type | Hydraulic cutting | |
Run out table(1 unit with 4 pieces) | Size | 1.2m*0.7m*1m*4 |
 |  |
 |  |
Roll forming machine:
Roll forming machine line with galvanized steel plate color or different color steel or aluminum as raw materials, production of products used in the roof of the building external plate and wall board, increase their roofs or walls of aesthetics and durability. The limitation of length of the line is not production, but according to construction requirements set many different sets of data on the computer controller, a key, after the "confirmation" equipment automatically according to the data of computer produce different length of the finished product. Through the production lines of the surface of the finished product level off is smooth, level off, without scratches, is advantageous for the construction of the installation. Products meet the national steel structure building standards.
