Home Companies FRIENDSHIP MACHINERY CO,LTD

1.2-2.5mm Thickness GI Metal Deck Roll Forming Machine With 15kw Motor

Active Member

Contact Us

Address: JINGUI ROAD 18,YANGSHAN INDUSTRIAL PARK,WUXI CITY, CHINA

Contact name:WANG

FRIENDSHIP MACHINERY CO,LTD

1.2-2.5mm Thickness GI Metal Deck Roll Forming Machine With 15kw Motor

City & Province	wuxi jiangsu

Product Details

1.2-2.5mm Thickness Metal Deck Roll Forming Machine With 15kw Motor

Technical proposal:

Name	Item	Specification
Coil requested	Material	galvanized steel
	thickness	1.2-2.5mm
	Tensile strength	235Mpa
	Coil width	1000mm
Decoiler(1 unit)	Type and weight capacity	Manual decoiler, 10T
	Inner diameter	498-508mm
	Outer diameter	Max:1200mm
Rollforming machine (1 unit)	Rolling speed	10m/min
	Motor	11KW, 3phase, 60Hz, 380V
	Rolling step	24
	Driving system	Chain transmission
	Structure of machine body	Entire wall steel structure
	Material of roller	45# steel, chromed thickness0.05mm
	Diameter of shaft	75mm
	Dimession	Abt.12m1.5m1.1m
	Weight	Abt.14T
Electric control cabinet(1 unit)	Main component	PLC, frequency convertor, touching screen, encoder
	Cutting and length measurement	Automatic
	Brand	Panasonic from Japan, can be chosen by client
Hydraulic station (1 unit)	Power and strength	3.5KW, 16Mpa
Cutting machine(1 unit)	Material of blade	GCr12 mov steel, heatment and hardness up to HRC58-62
Cutting machine(1 unit)	Cutting type	Hydraulic cutting
Run out table(1 unit with 4 pieces)	Size	1.2m0.7m1m*4

Working flow:

Manual decoiler---Guiding&feeding----Rollforming----Hydraulic cutting----Run out table

Roll forming main machine

Roll station: 18stations
Material of roller: Cr45 steel, polished and coated with chrome
Material of main shaft:45﹟forge steel diameter roller: Ф 85mm
Main power: 7.5KW machine
Transmission: by single Chains 1.2 inch
Feeding and guide: surface polished and coated with chrome
Machine adopt protect cover
Machine adopt new station with chrome (at the up of each station have dial)
Size of machine:10000x1600x1200(mm) L x W x H need 1x40GP container
Weight: about 6500Kgs
Color of machine: blue
Machine should be with four legs (made from metal) in 350mm
Motorized Pre-cutting: It is used when changing the coil of raw material; it can
Cut the coil rapidly and time-saving.
Cutting:

(1) Motorized Pre-cutting: It is used when changing the coil of raw material; it can

cut the coil rapidly and time-saving.
(2) Hydraulic Cutting after forming: Cut the sheet after roll forming to required
length
(3) Cutting motion: The main machine automatically stops and the cutting will take
place. After the cutting, the main machine will automatically start.
(4) Material of blade: CR12with heat treatment
(5) Length measuring: Automatic length measuring
(6) Tolerance of length: 3m+/- 1.5mm