Active Member
|
[China]
Address: Siming Industry Park China Industrial Mansion, Huli Qu, Xiamen Shi, Fujian Sheng,China
Contact name:
Xiamen BMS Group |
|
|
20M / Min Glazed Roof Tile Roll Forming Machine CE SGS Approved
O Work Flow
Uncoiler → Feed Guide Device → Roll Forming System → Hydraulic Post Cutting Device (Two Pieces CuttingBlades)→Exit Rack*3 →PLC Control System →Hydraulic Station
O Technical Parameters
| No. | Item | Parameters |
| 1. | Inspection Thickness | 0.5mm |
| 2. | Material Yield Strength | Q235 |
| 3. | Effective Width Tolerance | -2/+2mm |
| 4. | Forming stations | 18 stations |
| 5. | The Length Of Tolerance | ±0.5mm |
| 6. | Power for roll forming | 5.5KW |
| 7. | Power for cutting | 11kw |
O Profile
O Machine Components
1) Uncoiler
Manual/Auto control steel coil inner bore shrinkage and stop
Max Feeding Width: 1250mm
Max Capacity: 5ton
2) Feed Guide Device
The guiding position can be adjusted for suitable material feeding.
3)Roll Forming Machine
Body frame made from H400 type steel by welding
Side wall thickness: Q235 t18mm;Tie rod:dp22 Galvanized
Rollers manufactured from Bearing steel GCr12MoV=EN31 steel), precision machined, hard Chrome Coated; withthickness 0.5mm, surface with mirror treatment (for longer life and anti-rust);
Shafts manufactured from 45t!steel,Quenching and tempering heat treatment, hard chrome plating. Diameter=p75/90mm, precision machinedGear & chain drive about 18-step to form
Main Motor= 5.5KW, Frequency speed control
Speed reducer motor: R series
Chain : HUADE
All the screw bolts with grade 8.8 (cheap factories use low grade 4.8) to ensure fix the machine structure tightly andlong life during the machine long time running.
Product speed: 2-4m/ min (lncluding punching and cutting time)
Forming Speed:5-6m/min
4) Hydraulic Post Cutting Device (Two Pieces Cutting Blades)
Hydraulic Motor: 11KW
Cutting Tool Materail: Cr12Mov (= SKD 11 With At Least One Million Times)
5) Exit Rack*3
6) PLC Control System
Control The Quantity And Cutting Length Automatically
Input The Production Data (Production Batch, pcs, Length, etc.) On The Touch Screen ,lt Can Finish The Production Automatically.
Combined With: PLC, Inverter,Touch Screen, Encoder, etc
7) Hydraulic Station
8) Product Show
O After-Sale Service
1.The warranty is 24 months after the client receives the machine.
Within the 24 months, we will courier the replacement parts to the client free of charge
2. We offer technical support for the entire life of our machines
3.We can send our technicians to install and train the workers in the clients' factories withextra cost
O Packing method
Main body of machine is naked and covered by plastic film (to protect of dust and corrosion) loaded into container andsteadily fixed in container suitable by steel rope and lock, suitable for long-distance transportation.
