Active Member
|
[China]
Address: Siming Industry Park China Industrial Mansion, Huli Qu, Xiamen Shi, Fujian Sheng,China
Contact name:
Xiamen BMS Group |
|
|
ข้อมูล roll forming Shelf Support Keel Roll Forming Machine For Z Beam Profile
BMS Racking Roll Forming System including Pallet rack roll forming machine/Metal panel rack roll forming machine/Support beam rack roll forming machine and so on.
Machine Description
1. Material:
1) Suitable Coil Thickness: 0.5-1.0mm;
2)Test material thickness:0.8mm
3)Feeding width:58mm
4) Suitable Raw Material: Q235 Galvanized steel sheet
2. Equipment composition
Hydraulic de-coiler 1 set Max. loading 3 Tons
Roll forming System 1 set
Hydraulic cutting device 1 set
PLC Electrical control system 1 set
Hydraulic system 1 set
Decoiler→Feeding And Leveling Device→Hydraulic Punching Hole Device →
Roll Forming System→Hydraulic Post Cutter→Exit Rack
(1) Hydraulic De-coiler
Single - head de-coiler, unilateral discharge
Use hydraulic tightening
Pressure internal intensify
Oil pump type: Vane pump
Max. loading weight: 5000Kg
Max. coiling diameter: 600mm
Working pressure: 10mpa
Max. coil ID range: 508±30mm
2)Feeding & Leveling Device
After uncoiling, the coil goes into the unit guide wheel (Adjustable left and right)
Shafts manufactured from 45# steel, Diameter=φ90mm, plated with hard chrome-coated, precision machined.
Levelling roller are on top two shafts and three shafts,
totally five rollers in the following, surface quenching
3)Hydraulic Punching Hole
Pre-punching and Post cutting use the same hydraulic system
Working pressure: 0-16mpa
Mould material: Cr12Mov(=D2 steel), Quenching to 58-62°
Hydraulic station power: 7.5KW
4)Roll Forming System
Main motor: 5.5KW
Drive: Motor drive
Shafts diameter: ￠65mm,
Material 45# quenching and tempering treatment
Roller material: 40Cr Steel, CNC lathes, Heat Treatment, hard
Chrome Coated
with thickness 0.04mm, surface with mirror treatment(for longer
life and anti-rust)
Stations: 8 stations
The unit adopts frequency conversion 12-18m/min(excluding punching
time)
Computer PLC control, operation panel with touch screen display
5)Hydraulic Cutting Device
Hydraulic cutting for Z Beam profile, one for C profile,
manual adjusting
Blade material: Cr12Mov quenching to 58°-62°
Cylinder brand: Huade
Working pressure:30mpa
Working travel: 80mm
6)PLC Electrical control system
| Item No. | Main Part | Brand | Others |
| 1 | PLC | Schneider Electric | French brand |
| 2 | Inverter | Schneider Electric | French brand |
| 3 | 7-Inch Color Touch Screen | Schneider Electric | French brand |
| 4 | Encoder | Omron | Japan brand |
| 5 | Air Switch | LG-LS | Korea brand |
7)Finished products
Packing & Delivery
The main machine is directly loaded into the container, and the electrical components are wrapped with plastic film.
Payment terms and after-sale service:
1) FOB Xiamen or CIF your requirement port or L/C.
2) Payment: 30% T/T deposit, and pay the balance before shipping.
3) Delivery time: 45working days.
